Machines make many plastic things.
They melt tiny bits of plastic. Then they push the hot plastic into a shape. The plastic cools and gets hard. This makes toys and bottle caps.
It is very fast! Do you see plastic things in your house?
Machines make many plastic things.
First, tiny bits of plastic go into a hot tube. A screw turns to mix the plastic. This makes the plastic soft and runny.
Next, the machine pushes the hot plastic into a metal shape. This metal shape is called a mould. The plastic fills the shape and then cools down.
Once it is hard, the mould opens. The new part pops out!
This can make toys or bottle caps. It can even make car parts. This way is very fast at making many things.
How do we make so many plastic things? One way is called injection moulding.
This way is great for making many of the same object. It can make small toys or large car parts.
First, tiny bits of plastic go into a hot tube. We call these bits pellets.
Inside the tube, a screw turns. The screw mixes the plastic. The heat makes the plastic soft and runny. This makes it easy to move.
Next, the machine pushes the hot plastic into a metal shape. This shape is called a mould. The plastic fills the empty space in the mould. Then, it cools down and becomes hard. To help it cool fast, machines often use water or oil.
Once the part is hard, the mould opens. Small pins push the part out. This is called demoulding. The mould then closes to start again. Some moulds use steel. Other moulds use aluminium. Steel moulds can make over a million parts!
This process can even use two different plastics in one part.
Injection moulding is a way to make many plastic parts very quickly.
It is the most common way we make plastic things today. This method is perfect for making huge numbers of the same object. It can create tiny components or even large body panels for cars. Engineers must think about many things before they start. They must choose the right material, shape, and machine for the job.
The process starts when small plastic pellets enter a heated barrel.
Inside, a rotating screw moves the material forward. The heat makes the plastic soft and runny so it can flow. This flowing material is called a melt. The screw pushes a specific amount of this melt into a metal mould. This amount is called a shot. The machine uses high pressure to force the plastic into every corner of the mould cavity.
Making the moulds is a very important step in the history of this work.
In 1834, a man named Joseph Morgan filed a patent for moulding candles. Later, in 1846, Charles Hancock patented an injection moulding machine. In 1872, brothers John Wesley and Isaiah Hyatt patented a machine that worked like a large needle. These early machines were much simpler than the ones we use now. Over time, the technology grew to handle many different kinds of materials.
Different materials and moulds change how the work is done. Most people use thermoplastics because they are easy to recycle.
Moulds are usually made from strong metals like steel or aluminium. Steel moulds are very tough and can make over a million parts. They can also cost hundreds of thousands of dollars to build. Aluminium moulds are cheaper and faster to make for small jobs. However, they might wear out more quickly than steel ones.
You can see injection moulding in almost everything around you. It is used to make bottle caps, toys, and pocket combs.
It even makes parts for musical instruments and one-piece chairs. Some special machines can even do "two-shot" moulding. This means they put two different materials into one single part. This might give a knob a soft touch or add a second colour. It is a very versatile way to build our modern world.
Injection moulding is a high-speed manufacturing process used to create parts by injecting molten material into a mould.
A mould is a hollow container that gives the material its final shape. This process is essential because it allows for the mass production of identical objects very quickly. It is the most common modern method for manufacturing plastic parts. Engineers and industrial designers use it to create everything from tiny mechanical components to large automotive body panels. The versatility of this method comes from the wide range of materials and designs that can be used.
The process begins when raw material, often in the form of small pellets, is fed through a hopper into a heated barrel.
Inside the barrel, a reciprocating screw rotates to move the material forward. This rotation mixes the material and creates frictional heating, which helps melt the polymer. As the temperature rises, the Van der Waals forces between the molecular chains weaken. This reduces the viscosity, or thickness, of the material so it can flow easily.
The screw then pushes a specific volume of this molten material, called a shot, toward the front of the barrel. A small portion of the shot, about 10%, remains in the barrel to act as a cushion. This cushion helps transfer pressure from the screw to the mould cavity.
Once enough material has gathered, the machine forces the molten polymer into the mould cavity at high pressure and velocity. To prevent sudden pressure spikes, the machine often shifts from constant velocity to constant pressure control when the cavity is 95% to 98% full. This stage is known as packing pressure. Packing pressure is applied to compensate for thermal shrinkage, which is the tendency of the material to shrink as it cools.
This pressure is maintained until the gate, which is the entrance to the cavity, solidifies. Once the gate is solid, no more material can enter. The screw then moves back to collect material for the next cycle while the part cools inside the mould. To speed up this cooling, many machines use cooling lines that circulate water or oil.
Different types of polymers require different handling during the moulding process. Thermoplastics are the most common because they can be melted and reshaped, making them easy to recycle. In contrast, thermosetting polymers involve a chemical reaction. When two chemical components are injected into the barrel, they undergo irreversible chemical crosslinking. This process transforms the liquid into a permanent, solid network of molecules.
Because thermosets can harden inside the machine and damage the screw, manufacturers must carefully manage their residence time and temperature. Some machines use a cold injection unit to keep the chemicals stable before they enter the hot mould.
Moulds are also categorized by their material and how many parts they can make. Most industrial moulds are made from tool steels, which are very durable. A steel mould can be designed to produce over one million parts during its lifetime, though these moulds can cost hundreds of thousands of dollars to fabricate.
Aluminium moulds are a cheaper and faster alternative for low-volume production. However, aluminium is less suited for high-volume work because it has inferior mechanical properties. It is more prone to wear, damage, and deformation during the high-pressure clamping cycles.
The history of injection moulding shows how much the technology has evolved. In 1834, Joseph Morgan filed a British patent for moulding candles. In 1846, Charles Hancock patented an injection moulding machine. By 1872, American inventors John Wesley and Isaiah Hyatt patented a machine that functioned much like a large hypodermic needle.
This early machine used a plunger to inject material through a heated cylinder. While those early machines were simple, they laid the groundwork for the complex, high-precision systems used in modern factories today.
Modern advancements have introduced even more complex techniques like two-shot moulding and insert moulding. Two-shot moulding allows two different materials to be combined into a single part, such as adding a soft grip to a hard plastic knob.
Insert moulding involves placing pre-made components, like metal screws, into the mould cavity before the plastic is injected. This allows the plastic to form around the object, creating a single part with multiple materials. Furthermore, new hybrid approaches use woven fabric reinforcements, such as carbon or glass fibers. These composites can increase the tensile strength of the base polymer by as much as 4.18 times, providing a lightweight and strong alternative to metal in the automotive industry.
Where will your curiosity go next?
🖼️ Images & Media (12)
More to explore
✨ What else?
Related topics you might enjoy
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.