A saw is a tool.
It has sharp teeth. These teeth cut through wood. You can use it to make things. It is very helpful.
Do you like to build things?
A saw is a tool used to cut.
It has a hard edge with sharp teeth. These teeth can cut wood, metal, or stone. Long ago, people used shells or teeth to cut.
Later, people used copper and iron.
The teeth on a saw are not straight. They bend out to the sides. This makes the cut wider than the blade. Because of this, the saw does not get stuck.
You can use a saw by hand. You can also use power to move it. Saws help us build many things.
A saw is a tool used to cut material. Most saws have a tough blade with sharp teeth. People use them to cut wood, metal, or stone.
Long ago, people used shells or shark teeth to cut. Later, they used copper and bronze. When people learned to use iron, it became the best material for blades.
To make a cut, you move the saw back and forth. This creates a narrow path called a kerf. The kerf is the width of the cut.
Saw teeth are often bent sideways. This is called the set. The set makes the kerf wider than the blade. This helps the saw move easily without getting stuck.
Some saws use a lot of power. They can run on steam, water, or electricity. In the past, a pit saw needed two people. One person stood in a pit. The other stood above. They worked together to cut large logs.
A saw is a very useful tool for cutting things apart. Most saws have a tough blade or a wire with a sharp, toothed edge. People use them to cut through many different materials. Wood is the most common thing to cut, but saws can also cut metal or stone.
To make a cut, you move the toothed edge against the material. You can move it back and forth or push it forward continuously. This action creates a narrow path called a kerf. The kerf is the width of the cut left behind. The width of the kerf depends on many things. It depends on the blade width and how much the teeth stick out. It also depends on how much the blade wobbles while you work.
Saws have a very long history. At first, people used serrated materials like flint, shells, or shark teeth. Very old tools used for cutting wood were found in a cave in France. They date back between 30,000 and 90,000 years BCE. In ancient Egypt, people used copper saws as early as 2,686 BC. Later, they made saws out of bronze and iron.
Scientists and makers have improved saws over many years. In the 18th century, a better kind of steel was made in Sheffield, England. This steel was great because it was hard and springy. By the 1820s, Sheffield became a huge center for making saws. Over 50% of the nation's saw makers were there. Later, the industry in the United States began to grow very fast too.
Many different types of saws exist for special jobs. Some teeth are bent sideways to help the blade move. This is called the set, and it makes the kerf wider than the blade. This helps the saw move without getting stuck. Long ago, people used a pit saw to cut big logs. This tool was eight to ten feet long. It required two people working together to move the saw up and down.
A saw is a specialized tool used to cut through various materials. It typically consists of a tough blade, a wire, or a chain. The most important part is the hard, toothed edge. While saws are most often used to cut wood, they can also be used for metal or stone.
To understand how a saw works, you must look at the teeth and the cut they create. A toothed saw works by placing its edge against a material. The user then moves the tool back and forth or continuously forward. This motion uses force to tear through the material. This force can be applied by a person's hand or by machines powered by steam, water, or electricity.
When a saw cuts, it leaves behind a narrow channel called a kerf. The kerf is the width of the cut made by the blade. The width of the kerf is not just the thickness of the blade. It is also determined by the "set" of the teeth. The set is the degree to which the teeth are bent sideways away from the blade. By bending the teeth in alternating directions, the kerf becomes wider than the blade itself. This allows the blade to move through the material without binding, which means getting stuck.
Many factors can change the size of a kerf. It depends on the width of the blade and the set of the teeth. It also depends on how much the blade wobbles during the cut. If a blade is too thin, it may wobble excessively and create a wider kerf than expected. A tool called a saw tooth setter can be used to adjust the set of the teeth. In modern technology, a laser beam can also create a kerf. The width of a laser's kerf depends on the power of the laser and the material being cut.
Saws have a very deep history that stretches back to prehistory. The earliest saws were likely made from serrated stone or bone tools. Humans also used materials like flint, obsidian, sea shells, and shark teeth. In France, tools used to cut wood were found in a cave dating to 90,000–30,000 BCE. In ancient Egypt, copper saws were used as early as 2,686 BC.
Egyptian saws were originally made of hardened copper. They could cut on both the push and pull strokes. As they evolved, they were made of bronze and later iron. During the Iron Age, people developed frame saws that held thin blades in tension.
As technology improved, the materials used for saws changed. Once humans learned to use iron, it became the preferred material. Some cultures used "case hardening" to make the surface harder and sharper. By 1200 BC, steel was being used. Steel is iron with a moderate amount of carbon. In the mid-18th century, a superior material called "crucible cast" steel was made in Sheffield, England. This steel was highly valued because it was hard, ductile, and springy.
By the 1820s, Sheffield was a massive center for production. It contained over 50% of the nation's saw makers. Eventually, the United States industry began to overtake the British industry due to better mechanization and high tariffs on imports.
Different types of saws are designed for specific tasks. For example, a ripsaw has a tooth set similar to a chisel. This design helps it rip or tear material apart. A "flush-cutting saw" is different because it has no set on one side. This allows the user to lay the saw flat against a surface to cut without scratching it. Another historical example is the pit saw. This was a large, two-man ripsaw used in early colonial North America. It could be eight to ten feet long. One person, called the "pit-man," stood in a pit while a "top-man" stood above. They worked together to guide the saw and raise it.
Where will your curiosity go next?
🖼️ Images & Media (10)
More to explore
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.