Things can feel a lot of push.
You can pull a rubber band. You can also squeeze a soft sponge. This push or pull is called stress. It can change how things look. Have you ever squeezed something hard?
Things can feel a lot of push.
You can pull a rubber band. This is a pull. You can also squeeze a sponge. This is a push.
This push or pull is called stress. It happens when things change shape. A big push makes more stress. A small space makes even more stress.
Stress can come from many things. It can come from gravity. It can even come from heat.
Too much stress can break things. It can make a vase crack.
Stress is part of our world.
Everything in our world feels forces.
Stress describes these forces inside a material. It happens when an object changes shape. This change is called strain.
There are different kinds of stress. Tensile stress happens when you pull something apart. A stretched rubber band feels this. Compressive stress happens when you push something together. A crumpled sponge feels this. There is also shear stress. This happens when forces act parallel to a surface.
Stress depends on two things. It depends on how much force you use. It also depends on the area. A small area makes stress much higher.
Stress comes from many sources. Gravity can cause it. Changes in heat can cause it. Even chemical changes can work.
Too much stress can be bad. It can cause permanent damage. A solid might break or crack.
This is why builders study stress. They want to make sure arches and beams stay strong.
Stress is a way to describe the forces inside a material. It helps us understand what happens when an object changes shape.
When you pull an elastic band, it undergoes tensile stress. This pulling can cause the band to get longer. If you push a sponge together, it feels compressive stress. This pushing might make the sponge shorter. Stress depends on two main things: force and area. If you use a huge force on a tiny area, the stress becomes very large.
Scientists measure this using units like the pascal (Pa). This is the same unit used to measure pressure.
To understand how stress works, imagine the tiny particles inside an object.
These particles are always pushing or pulling on their neighbors. When an object is pulled, these internal forces act to resist the change. This resistance is like the reaction force of a stretched spring. In solids, this internal force is called elastic stress. It tries to pull the material back to its original shape. In liquids and gases, stress can also happen if the volume changes. If a liquid moves, it might also have viscous stress. This type of stress opposes the way the fluid flows.
People have known about these internal forces since ancient times.
For thousands of years, builders used their intuition to make strong structures. They learned how to use stone blocks and wood beams effectively. They created amazing things like arches, cupolas, and flying buttresses in Gothic cathedrals.
However, a true scientific way to calculate stress came much later. In the 17th and 18th centuries, new tools were invented. Scientists like Galileo, Descartes, and Newton provided the math needed for study. Finally, Augustin-Louis Cauchy created the first mathematical model for stress and strain. He showed how forces act across imaginary surfaces inside a material.
Stress can come from many different places.
External forces like gravity or friction can cause it. Even changes in temperature can create stress inside a material. Sometimes, stress exists even if no one is touching the object. This is used in things like tempered glass or prestressed concrete. There are also different ways to look at the direction of stress. Normal stress acts perpendicular to a surface. Shear stress acts parallel to a surface.
Scientists use a complex mathematical tool called a tensor to describe these directions. This helps engineers understand exactly how a material is being pushed or pulled.
Understanding stress is vital for keeping our world safe.
If stress becomes too high, the material can reach its strength limit. This can cause permanent damage, like a crack or a break. A solid might even change its chemical makeup or crystal structure. You might see this in a glass vase that develops tiny cracks.
Engineers study these limits so they can build safe bridges and tools. They use the math of stress to make sure a fishing pole bends without snapping. By knowing how materials react, we can build much bigger and stronger things.
In the field of continuum mechanics, stress is a physical quantity used to describe the internal forces present during the deformation of a material.
While we often think of forces acting on the outside of an object, stress describes how those forces are distributed throughout the material's body. It is a macroscopic concept, meaning it treats the material as a continuous whole rather than focusing on individual atoms. This allows scientists to analyze how a solid or fluid behaves without needing to track every single molecule. By understanding stress, engineers can predict whether a structure will hold its shape or fail under a heavy load.
To understand the mechanism of stress, one must look at the relationship between neighboring particles.
In a solid, such as a vertical bar supporting a weight, each particle pushes against the particles immediately below it. These macroscopic forces are actually the net result of a massive number of intermolecular forces and collisions. Stress is mathematically defined as the force acting across a small boundary divided by the area of that boundary. Because the force can act in different directions, stress is often represented by the Cauchy stress tensor. This mathematical tool uses a 3x3 matrix of numbers to describe how forces are distributed in three-dimensional space.
Stress is categorized into different types based on the direction of the force relative to a surface. One primary type is normal stress, which acts perpendicular to the surface. If the force is pulling the particles apart, it is called tensile stress. If the force is pushing the particles together, it is called compressive stress.
Another type is shear stress, which acts parallel to the surface.
In a liquid at rest, the force is perpendicular to the surface, which we commonly recognize as pressure. However, in a flowing or viscous liquid, the force may not be perpendicular, requiring the use of shear stress to describe the internal friction.
Humanity has understood the principles of internal force for thousands of years, even without modern math.
Ancient builders used intuition to create massive structures like arches, cupolas, and flying buttresses in Gothic cathedrals. They learned how to shape stone and wood to distribute stress effectively. However, a rigorous scientific understanding only emerged in the 17th and 18th centuries. The development of Galileo’s experimental methods, Descartes’s analytic geometry, and Newton’s laws of motion provided the necessary foundation. This allowed Augustin-Louis Cauchy to eventually create the first general mathematical model of a deformed elastic body by introducing the formal notions of stress and strain.
Quantitatively, stress is measured in units of force per unit area. In the International System of Units (SI), this is expressed as newtons per square meter (N/m²), also known as the pascal (Pa).
Because many engineering applications involve very high forces, scientists often use the megapascal (MPa), which represents one million pascals. The magnitude of stress is highly dependent on the area over which a force is applied. If a large force is concentrated on a very small cross-sectional area, the resulting stress will be extremely high. This relationship is vital for calculating the strength of materials like steel beams or thin wires.
Stress can arise from many different sources beyond simple pulling or pushing. External loads like gravity or friction create stress on the surface or throughout the bulk of a material.
Changes in temperature or chemical composition can also impose stress without any external force being applied. Some materials, such as tempered glass or prestressed concrete, actually have built-in stress designed into them. Additionally, electromagnetic fields can induce stress in specialized materials like piezoelectric or magnetostrictive substances. Even if no visible deformation occurs, significant internal stress may still be present within the material.
When stress is applied, it often results in strain, which is the measure of how much the material deforms.
In solids, this deformation creates an internal elastic stress that acts like a spring to restore the original shape. However, if the stress exceeds the material's strength limits, the results can be permanent. This can lead to plastic flow, where the material stays bent, or even total fracture and breakage. In extreme cases, the stress can even change the chemical composition or the crystal structure of the material. Understanding these limits allows us to design everything from fishing poles to massive bridges safely.
Where will your curiosity go next?
🖼️ Images & Media (13)
+ 1 more
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.