Things can change shape.
You can push or pull them. Some things snap back. They go back to their old shape. Other things stay changed. Like soft gum! Can you find something that stays changed?
Things can change shape.
This is called deformation. You can push or pull on an object.
Some changes are temporary. If you let go, the object snaps back. This is like a rubber band. It goes back to its old shape.
Other changes stay forever. This is called permanent change. The object stays a new shape.
Soft things like gum change a lot. Hard things like glass might just break. All things will break if you push hard enough.
It is fun to see how things bend and move.
Objects can change their size or shape. This is called deformation.
There are two main ways this happens. The first way is called elastic deformation. This is a temporary change. If you stop pushing or pulling, the object snaps back. It returns to its original shape. This is like a rubber band.
The second way is called plastic deformation. This is a permanent change. The object stays in its new shape even after you let go.
Some metals, like gold or copper, change this way very easily. Soft things like wet chewing gum also show this.
If you keep pushing, the object might reach a breaking point. This is called a fracture. A fracture is a break in the material. Most materials will eventually break if you apply enough force.
Engineers study these changes to build safe things. They look at stress, which is the force on an object. They also look at strain, which is the amount of change. They use these ideas to pick the best materials for buildings or machines.
Deformation is a term used in engineering to describe how an object changes its size or shape. When you apply force to something, it might stretch, squash, or bend. If an object does not change shape at all, engineers call it rigid.
To understand this, we look at two different ideas. Displacement is when a whole object moves to a new position or rotates. Deformation is different because it changes the distance between the points inside the object itself. This change is called strain.
There are two main ways that deformation works. The first way is called elastic deformation, which is temporary. This happens when the force applied does not break the molecular bonds inside the material. Once you stop the force, the object returns to its original shape. This is similar to how a spring works.
The second way is called plastic deformation, which is permanent. This happens after the material passes a specific point called the yield point. Even after the force is removed, the object stays distorted.
Scientists and engineers have studied these changes for a long time. They use math to describe how materials act under pressure. For example, Hooke's law helps explain linear elastic deformation. This law shows the relationship between stress and strain. Stress is the force applied to an object. Strain is the resulting change in shape.
Engineers use these rules to test materials like steel or concrete. This helps them know how much weight a bridge or a building can hold.
Different materials behave in very unique ways. Metals like gold, silver, and copper are ductile, meaning they change shape easily. Soft things like wet chewing gum also show large plastic deformation. However, hard materials like ceramics or glass are brittle. They do not change shape much before they experience a fracture, which is a break.
If you pull a metal object too far, it might enter a stage called necking. This is when the middle of the object gets much thinner. Eventually, the material can no longer hold the force and it will rupture.
Understanding deformation helps us connect science to the world around us. When you see a metal pole buckle under a heavy load, you are seeing structural failure.
Engineers also look at the difference between engineering stress and true stress. Engineering stress assumes the object's size stays the same during the test. True stress accounts for the fact that the object actually gets thinner as it stretches.
This careful study ensures that the machines and buildings we use every day are safe and strong.
In engineering, deformation is the change in the size or shape of an object. This process is vital for understanding how structures and machines respond to forces. When forces act on a material, the object may stretch, squash, or bend. If the change in size is so small that it cannot be measured, the object is called rigid.
To study this, engineers distinguish between displacement and deformation. Displacement refers to a change in position, such as a whole body moving or rotating. Deformation is different because it involves changes in the relative positions of internal points within the object. This internal change is known as strain.
Deformation occurs through specific mechanical processes. When an external force, or stress, is applied, it acts on the internal structure of the material. This stress can cause the material to change its dimensions. For example, compressive stress can shorten an object while causing it to bulge outward laterally.
This happens because the material is strong enough to avoid cracking, but not strong enough to resist the load without changing shape. Internal forces at right angles to the deformation work to resist the applied load. The relationship between the applied stress and the resulting strain is a core focus of structural analysis and the field of strength of materials.
Materials generally undergo two distinct types of deformation: elastic and plastic. Elastic deformation is temporary and recoverable. This occurs when the applied stress does not exceed the energy required to break molecular bonds. Once the stress is removed, the material returns to its original shape.
In many metals and crystals, this relationship is linear and follows Hooke's law. Hooke's law states that stress is equal to the elastic modulus, or Young's modulus, multiplied by the strain. The area under this elastic region is referred to as resilience.
If the stress continues past a specific threshold called the yield point, plastic deformation begins. Plastic deformation is permanent and irreversible. Even after the applied forces are removed, the object remains distorted.
Some materials, like soft thermoplastics, copper, and gold, have large plastic deformation ranges. These are described as ductile materials. Conversely, materials like ceramics, glass, and cast iron have very minimal plastic deformation ranges. These materials are considered brittle because they tend to fracture rather than change shape permanently.
When a ductile material is pulled under tensile stress, it follows a specific sequence of stages. First, it undergoes elastic deformation, followed by a period of strain hardening. During strain hardening, the material actually becomes stronger due to the movement of atomic dislocations. Eventually, the material reaches its ultimate tensile strength. After this point, it enters the necking region. Necking is characterized by a rapid reduction in the cross-sectional area of the specimen.
Finally, the process ends when the material undergoes a fracture, also known as a rupture.
Engineers use different mathematical models to measure these changes. Engineering stress and strain are approximations used when the change in size is considered negligible. These calculations assume the cross-sectional area of the object remains constant. However, in reality, the area decreases as the object deforms. To account for this, scientists use true stress and true strain. True stress is calculated using the instantaneous cross-sectional area and length of the object.
In a tension test, the true stress is larger than the engineering stress, while the true strain is less than the engineering strain.
Understanding these principles is essential for preventing structural failure. Failure can occur in several ways depending on the material and the force. In brittle materials, failure usually happens through sudden rupture. In ductile materials, failure can occur through yielding. For long, slender elements like columns, failure often occurs through buckling. Buckling happens when an increase in compressive force causes the structure to bend at a stress level lower than its actual compressive strength.
By analyzing these stress-strain curves, engineers ensure that buildings, bridges, and machines can safely withstand the loads they are designed to carry.
Where will your curiosity go next?
🖼️ Images & Media (8)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.