Nepedia
Back to Discover
Advanced Reader
🌍

Petroleum reservoir

earth science Maturity 7-9 Next article →

A petroleum reservoir is a subsurface accumulation of hydrocarbons held within porous or fractured rock. These reservoirs contain liquid petroleum, known as crude oil, and natural gas. They are vital to the global energy supply and form through complex geological processes over millions of years.

Contour map software screen snapshot of isopach map for 8500ft deep OIL reservoir with a Fault line
Contour map software screen snapshot of isopach map for 8500ft deep OIL reservoir with a Fault line

Understanding how these materials form and where they are trapped is a central focus of petroleum geology.

The formation of a reservoir begins with organic matter, such as plankton and algae. When these organisms die, they sink to the bottom of aquatic ecosystems like seas, lakes, or rivers. Over time, they are buried under thick layers of sand and mud. As they reach depths between 1,000 m and 6,000 m, the heat and pressure increase. Temperatures between 60 °C and 150 °C act on this organic material, a process called thermal cracking. This transforms the ancient matter into kerogen and eventually into liquid hydrocarbons.

Southeast Texas at night 2012
Southeast Texas at night 2012

Because oil and gas are lighter than water, they migrate upward through permeable rock. They continue this migration until they encounter an impermeable layer that stops them.

Geologists classify reservoirs into two main types: conventional and unconventional. Conventional reservoirs occur when hydrocarbons are trapped by an overlying rock formation with low permeability. This top layer is often called a cap rock or a seal. In contrast, unconventional reservoirs consist of rocks with high porosity but very low permeability. In these cases, the hydrocarbons are tightly bound to the rock fabric by strong capillary forces. These reservoirs do not require a traditional cap rock to keep the oil and gas in place.

Viscosity Permeability Classification scheme
Viscosity Permeability Classification scheme

To keep hydrocarbons from escaping, nature must create a trap. Petroleum geologists identify three primary categories of traps. Structural traps are formed by changes in the Earth's subsurface structure, such as folding or faulting. These create shapes like domes or anticlines that catch rising oil. Stratigraphic traps occur when there are lateral or vertical changes in rock thickness or texture, such as in reefs. The rarest type is the hydrodynamic trap, which is caused by differences in water pressure.

Contour map software screen snapshot of isopach map for 8500ft deep OIL reservoir with a Fault line
Contour map software screen snapshot of isopach map for 8500ft deep OIL reservoir with a Fault line

Most of the world's petroleum reserves are found in structural traps.

The seal or cap rock is essential for preventing further upward migration. A capillary seal forms when the pressure required to move fluids through the rock pores is greater than the buoyancy of the oil. There are two ways these seals can leak. A membrane seal leaks when the pressure difference exceeds a specific threshold, but it will reseal once the pressure drops. A hydraulic seal occurs in rocks like tight shales or evaporites. In these rocks, the pressure required to fracture the rock is actually lower than the pressure needed to move the fluid through the pores.

Toisa Perseus&Discoverer Enterprise
Toisa Perseus&Discoverer Enterprise

The petroleum industry is divided into three distinct sectors. The upstream sector involves the production of crude oil from wells and the separation of water from the oil. The midstream sector focuses on the transport of crude oil via pipelines or tankers. Finally, the downstream sector handles the refining of crude oil into usable products, their marketing, and their transport to stations.

Oil wells just offshore at Summerland, California, c.1915
Oil wells just offshore at Summerland, California, c.1915

Managing these sectors involves massive logistics, including roads, housing, and specialized construction companies.

There are more than 65,000 oil fields located on land and offshore around the world. The largest oil fields are the Ghawar Field in Saudi Arabia and the Burgan Field in Kuwait. These massive fields contain an estimated 66 to 104 billion barrels each. For natural gas, the largest field is the South Pars/Asalouyeh field, shared by Iran and Qatar. Other major gas fields include the Urengoy, Yamburg, and Vučkovec fields.

Iran Gas Fields Location-PesareAmol
Iran Gas Fields Location-PesareAmol
Postrojenje na eksploatacijskom polju Vučkovec
Postrojenje na eksploatacijskom polju Vučkovec

In 2008, exploration reached extreme depths, such as the Blackbeard site in the Gulf of Mexico, which passed 32,000 feet.

Toisa Perseus&Discoverer Enterprise
Toisa Perseus&Discoverer Enterprise
621 words

Where will your curiosity go next?

Keep exploring at your chosen reading level.

🖼️ Images & Media (7)
File:Contour map software screen snapshot of isopach map for 8500ft deep OIL reservoir with a Fault line.jpg
Contour map software screen snapshot of...
File:Oil_wells_just_offshore_at_Summerland,_California,_c.1915.jpg
Oil_wells_just_offshore_at_Summerland,_Cal...
File:Southeast_Texas_at_night_2012.png
Southeast_Texas_at_night_2012.png
File:Iran Gas Fields Location-PesareAmol.png
Iran Gas Fields Location-PesareAmol.png
File:Postrojenje na eksploatacijskom polju Vučkovec.JPG
Postrojenje na eksploatacijskom polju Vučkovec.JPG
File:Toisa Perseus&Discoverer Enterprise.jpg
Toisa Perseus&Discoverer Enterprise.jpg
File:Viscosity Permeability Classification scheme.svg
Viscosity Permeability Classification scheme.svg
More to explore

🔬 Go deeper

More advanced topics to explore

🪜 Step back

Simpler topics to build understanding

What is Nepedia?

A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.