Some big ships use special heat.
This heat makes steam. The steam turns a wheel. This wheel moves the ship. It can go for a long time. It does not need much food. Can you see a big ship?
Some big ships use special heat.
This heat makes steam. The steam turns a wheel. This wheel moves the ship.
This heat comes from a special part. It is inside a machine. The machine makes heat. This heat warms up water.
The warm water makes steam. The steam moves a part called a turbine. This turbine turns a propeller. The propeller pushes the ship.
These ships can go for a long time. They do not need much fuel. They can stay at sea for many months.
Most of these ships are for the navy. Some are very large. They can carry many planes.
Some big ships use nuclear power to move.
This power comes from a nuclear reactor. A reactor is a machine that makes heat. This heat is used to make steam.
Inside the ship, the reactor heats water. This water stays under pressure so it does not boil. The hot water goes to a steam generator. There, it heats a second set of water. This second water turns into steam. The steam moves through a turbine. A turbine is a wheel with many blades. As the steam hits the blades, the wheel spins. This spinning motion turns a propeller to move the ship.
Nuclear ships have many benefits. They can stay at sea for a very long time. They do not need to stop for fuel often. This gives them much more room for supplies. Most nuclear ships are used by navies. They include submarines and large aircraft carriers.
Some ships, like icebreakers, also use this power to move through thick ice.
Nuclear marine propulsion is a way to move ships and submarines using heat from a nuclear reactor.
This technology is very important for many large vessels. It allows them to travel for a very long time without needing to refuel. Because the fuel stays inside the reactor, there is no need for large tanks for oil or coal. This saves a lot of space for other supplies or cargo. Most of these ships are used by navies for military work.
How does this system work step by step? First, a reactor creates heat through a process called nuclear fission.
This heat is used to warm up water in a primary circuit. This water is kept under high pressure so it does not boil. The hot water then moves to a steam generator to heat a second water circuit. This second circuit turns into steam, which travels through a turbine. The steam hits the blades of the turbine to make it spin. This spinning motion can turn a propeller through a gearbox or power an electric motor.
Humans began developing this technology in the 1940s. In the United States, Admiral Hyman G. Rickover led the design and production of these plants. The first prototype naval reactor was tested in Idaho in 1953. The first nuclear submarine, named the Nautilus, went to sea in 1955. This changed how submarines worked forever. They were no longer just boats that could dip under the water for a short time. They became true underwater vessels that could stay submerged for a very long time.
There are many different types of nuclear ships in the world. The Russian navy builds very large submarines, like the 26,500 tonne Typhoon class. Some American aircraft carriers use two reactors for power. The French navy has a large aircraft carrier called the Charles De Gaulle.
Most marine reactors are the pressurized water type. However, some navies have used liquid metal cooled reactors instead. These ships must be built to handle rough seas and salt water corrosion. They also have to work perfectly even when they are thousands of miles from home.
Nuclear marine propulsion is quite different from the power plants on land. Land plants are huge and can take up hundreds of hectares of space. Marine reactors must be much smaller to fit inside a ship. Because they are small, they must produce a lot of power in a tight space. This puts more stress on the parts of the reactor. They also use special fuel, like a metal-zirconium alloy, to last longer. Some reactors even use a "burnable poison" to help the fuel stay active as it ages.
Nuclear marine propulsion is the method of moving ships and submarines using heat from a nuclear reactor.
This technology is vital for naval operations and specialized civilian vessels. It allows a ship to operate for very long periods without refueling. Since the fuel is contained entirely within the reactor, no space is lost to fuel tanks. There is also no need for exhaust stacks or large air intakes for combustion. While it offers great advantages, the high cost of infrastructure means most nuclear vessels are military.
The mechanism of a pressurized water reactor involves several distinct steps. First, nuclear fission generates intense heat within the reactor core. This heat is transferred to a primary water circuit. This water is kept under high pressure so it does not boil.
Pumps circulate this hot water to a steam generator. In the steam generator, the heat from the primary circuit warms a separate water circuit. This second circuit turns into steam and travels toward a steam turbine. As the steam expands, it hits the rotating blades of the turbine to impart energy. This spinning turbine can turn a propeller through a gearbox. Alternatively, the turbine can turn an electrical generator to power drive motors.
Marine reactors differ significantly from the large power plants found on land. Land-based plants can produce up to 1600 megawatts of electrical power. In contrast, a typical marine propulsion reactor produces only a few hundred megawatts. Space is a major constraint at sea, so marine reactors must be physically small. This requires them to generate much higher power per unit of space. Consequently, the components face much greater physical stresses. They must also withstand vibration and the pitching of a ship in rough seas. Furthermore, engineers cannot rely on gravity to drop control rods during a shutdown. This is because a ship does not always remain upright. Salt water corrosion also presents a constant maintenance challenge.
To achieve long operation times, marine reactors use specialized fuel and design features. The fuel is often a metal-zirconium alloy rather than the ceramic uranium dioxide used on land. This fuel is typically more highly enriched to ensure a sustained reaction in a small core. Some U.S. submarines use fuel enriched to over 96% U-235. This high enrichment increases power density and extends the life of the fuel. To manage the aging fuel, engineers include a "burnable poison" in the fuel elements. This substance is slowly depleted as the fuel ages. As the poison disappears, the reactivity of the core increases to compensate for the aging fuel.
The history of this technology is closely tied to the mid-20th century. In the United States, Admiral Hyman G. Rickover led the development of these plants. The first prototype naval reactor was tested in Idaho in 1953. The USS Nautilus, the first nuclear submarine, went to sea in 1955. This invention revolutionized the submarine by making it a true underwater vessel. It could stay submerged for long periods, limited only by the crew's endurance. In 1960, the Nautilus completed the first submerged circumnavigation of the Earth. The Soviet Union also developed nuclear submarines, such as the Project 627 type.
Today, various nations utilize different types of nuclear marine vessels. The Russian navy operates very large submarines, like the 26,500 tonne Typhoon class. The United States and France have both built nuclear-powered aircraft carriers. The French carrier Charles De Gaulle is a 42,000-tonne flagship. Different navies also use different propulsion methods. The Russian, American, and British navies often use direct steam turbine propulsion. However, French and Chinese ships use turbo-electric transmission to generate electricity for their motors.
Managing nuclear vessels also involves complex legal and environmental responsibilities. Decommissioning nuclear submarines is a major task for the U.S. and Russian navies. In the United States, the reactor section is often cut from the vessel for disposal. In Russia, some vessels or sealed reactor sections are stored afloat. Because an accident could cross national boundaries, insurance is handled differently than for regular ships. The 1962 Brussels Convention attempted to address this, but it was never ratified. In the United States, nuclear reactors under federal jurisdiction are insured via the Price-Anderson Act.
Where will your curiosity go next?
🖼️ Images & Media (8)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.