We can find out how much of a thing is in a mix.
We do this by weighing it. It is very, very exact. This helps us learn about the world. It is like a math puzzle. Can you imagine weighing tiny things?
We can find out how much of a thing is in a mix.
We do this by weighing it. This is a very exact way to work. Scientists can turn a part of a mix into a solid. They can also use heat to turn it into a gas.
Once it is a solid or a gas, they weigh it. This tells them how much was there. It is a very smart way to solve a puzzle.
Scientists have many ways to study a mix. One way is called gravimetric analysis. This method uses mass to find out how much of a thing is in a mix. Mass is just how much something weighs.
This way of working is very exact. It can even help check if other tools are working right. One way to do this is through precipitation. This is when a solid forms in a liquid. Scientists can add a special liquid to make a solid appear.
They can then weigh that solid to find the answer. Another way is called volatilization. This uses heat to turn a part of a mix into a gas. The gas is then captured or measured.
Some methods are very old, like using silver. Today, scientists often use faster tools. But gravimetric analysis is still a great way to get very precise results. It does not always need expensive tools to work well.
Gravimetric analysis is a special way to study science. It helps scientists find the exact mass of a specific thing in a mix. This thing is called an analyte. Scientists use the weight of this analyte to learn about it.
The goal is to separate the analyte from the rest of the mix. This is done by changing its phase. A phase is just the form a thing takes, like a solid or a gas. Once it is pure, its weight can be measured very carefully.
There are different ways this work happens. One way is called precipitation. This is when a solid forms inside a liquid. A scientist adds a special liquid to a mix. This causes the analyte to turn into a solid.
Another way is called volatilization. This method uses heat or chemical energy. It turns the analyte into a gas so it can be removed. Scientists can also use electricity or other physical methods. Each way helps separate the pure part from the original mixture.
This method is very old and very useful. It was used to find the atomic masses of many elements. It was so accurate it reached six figure precision.
Because it is so precise, it can even check other tools. Scientists use it to calibrate instruments. This means they use it to make sure other machines are correct. Some older ways, like using silver, are now called archaic. This means they are old-fashioned. Today, faster tools like spectroscopy are often used instead.
Scientists use many specific steps for these tests. To find potassium, they use hexachloroplatinic acid. This creates a solid called potassium hexachloroplatinate.
To find phosphate, they add ammonium molybdate. This creates ammonium phosphomolybdate. They can also use organic ligands to find metals. For example, dimethylglyoxime helps find nickel. This makes a bright red solid. They can also find barium by heating sulfamic acid. This makes barium sulfate, which does not dissolve in water.
You can see these ideas in everyday life. For instance, you might use antacid tablets. These tablets contain sodium bicarbonate. Scientists can use volatilization to study these. They add sulfuric acid to the mix. Then, they bubble nitrogen gas through the liquid. The gas carries away carbon dioxide.
A special tube with sodium hydroxide catches the gas. By weighing the tube before and after, they find the mass. This is just like how we weigh ingredients for baking. It is all about measuring mass to find an answer.
Gravimetric analysis is a highly precise method used in analytical chemistry. It is used for the quantitative determination of an analyte. An analyte is the specific ion being analyzed within a mixture. This method works by determining the mass of the analyte. To do this, the analyte must first be turned into a unique, pure compound. Once the mass of this compound is known, scientists can calculate the mass of the original analyte. This is possible as long as the quantities of other parts in the mixture are known.
The core mechanism of gravimetry involves changing the phase of the analyte. A phase change means moving from one state, like a liquid, to another, like a solid or a gas. By changing the phase, the analyte can be separated from the original mixture in its pure form. This process allows for extremely accurate measurements. In fact, gravimetric analysis was once used to determine the atomic masses of many elements. These measurements reached a precision of six figures. Because it relies on mass, it provides very little room for instrument error. It also does not require a series of standards to calculate an unknown amount.
There are four main types of gravimetric analysis. The first is precipitation, where a solid forms from a liquid solution. The second is volatilization, which involves turning a substance into a gas. The third type is electro-analytical, and the fourth is a miscellaneous physical method. Precipitation is a very common approach. For a precipitation reagent to work well, the resulting precipitate should be nonhygroscopic. This means its weight does not change based on the humidity in the air. The product should also have a high molecular weight. This makes it easier to measure even very small quantities of the analyte.
Precipitation can be a complex process with certain challenges. One problem is impurities in the solid. These impurities can be caused by occlusions or surface adsorption. Adsorption happens when other ions stick to the surface of the precipitate. To avoid this, scientists sometimes use homogeneous precipitation. This is the formation of a precipitate from a single, uniform solution. An example of this is the formation of barium sulfate. Another challenge is that the solubility of a precipitate can be affected by other ions. For instance, the solubility of silver chloride can increase significantly in the presence of certain anions.
Different chemical agents can be used to target specific elements. To quantify potassium, scientists use hexachloroplatinic acid as a precipitating agent. This creates potassium hexachloroplatinate, which is easy to weigh. To find phosphate, ammonium molybdate is added to a solution. This results in a precipitate called ammonium phosphomolybdate.
Scientists also use organic ligands to find specific metal ions. For example, treating nickel ions with dimethylglyoxime creates a bright red precipitate. Similarly, 8-hydroxyquinoline can be used to find aluminium by creating aluminium tris(8-Hydroxyquinolinate).
Volatilization methods use thermal or chemical energy to isolate a substance. In these methods, the analyte is removed by heating or chemical decomposition. This turns the analyte into a volatile species, which is a gas. One example involves determining the calcium content in water. Scientists add oxalic acid to precipitate calcium oxalate. This precipitate is then ignited at a high, red heat in the air. This heat converts the calcium oxalate into calcium oxide. By weighing the substance before and after this process, the mass of the analyte lost can be revealed. This allows scientists to calculate the percent concentration of the analyte in the original mix.
Another example of volatilization is isolating sodium bicarbonate from a mixture. This is the main ingredient in many antacid tablets. Scientists add dilute sulfuric acid to the solution. Then, nitrogen gas is bubbled through the flask. The gas carries carbon dioxide out of the solution. The gas passes through a drying agent like calcium sulfate to remove water vapor. It then passes through a mixture of sodium hydroxide on a silicate base. This mixture absorbs the carbon dioxide. By measuring the increase in mass of this absorbent, the mass of the carbon dioxide is found.
While gravimetric analysis is incredibly accurate, it has some limitations. It usually only allows for the analysis of one or a few elements at a time. The methods can also be quite convoluted, meaning they involve many steps. Because of this, gravimetric analysis has been partly displaced by spectroscopic methods. Spectroscopy is often faster and requires less intervention. However, gravimetry remains so reliable that it is used to calibrate other instruments. Instead of using separate reference standards, scientists use the high accuracy of gravimetry to ensure other machines are working correctly.
Where will your curiosity go next?
🖼️ Images & Media (3)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.