An engine helps cars move.
It uses air and fuel. It makes a small pop. This pop pushes a part down. Then it pushes old air out. This makes the wheels turn.
Can you hear a car go?
An engine helps many things move.
It works in four steps. First, the engine pulls in air and fuel.
Next, it squeezes that mix together. Then, a tiny spark makes a pop. This pop pushes a part down to make power.
Last, the engine pushes the old air out. This cycle helps cars, trucks, and even planes move.
It is a very busy way to move!
A four-stroke engine helps many machines move.
It is a type of internal combustion engine. This means it burns fuel inside its parts to make power. Most cars and trucks use this design. It works in a set of four steps called strokes.
First is the intake stroke.
The piston moves down to pull in a mix of air and fuel. Next is the compression stroke.
The piston moves up to squeeze the mix tightly. This makes it ready to burn.
Third is the power stroke.
A spark plug makes a tiny spark. This ignites the fuel. The small explosion pushes the piston down with great force. This force turns the crankshaft to make the machine move. Finally, there is the exhaust stroke.
The piston moves up again. It pushes the used air out of the engine. This cycle repeats very fast to keep the engine running.
A four-stroke engine is a type of internal combustion engine. This means it burns fuel inside the engine to create power. These engines are very common in our world today. You can find them in cars, trucks, and motorcycles. They are also used in light aircraft and even diesel trains.
This engine design is a major way we move people and things across land. It works by using a piston that moves up and down inside a cylinder.
The engine works through a way of working called a cycle. It has four separate steps, which are called strokes.
First is the intake stroke. The piston moves down to pull an air-fuel mixture into the cylinder. Next is the compression stroke.
The piston moves back up to squeeze that mixture tightly.
Third is the power stroke. A spark plug ignites the fuel, which pushes the piston down with force. This force turns a part called the crankshaft. Finally, the exhaust stroke happens.
The piston moves up to push the used air out through an exhaust port.
People have been working on these engines for a long time. In 1860, a man named Jean Joseph Etienne Lenoir built an engine in Paris. It ran on illuminating gas and had only 2 horsepower.
Later, Nicolaus Otto studied how compression could make engines better. In 1876, Otto and his partner Langen created an engine that compressed fuel for much higher efficiency. This was a huge step forward for technology. Other famous names like Gottlieb Daimler and Wilhelm Maybach also helped develop high-speed engines.
There are different kinds of these engines with different jobs.
James Atkinson invented a special version in 1882 called the Atkinson cycle. It is designed to be very efficient, so it is used in some modern hybrid cars like the Toyota Prius.
Another type is the diesel engine. Rudolf Diesel wanted an engine that could use heavier fuel. He created a successful high-compression engine in 1893.
Diesel engines are often used for heavy-duty jobs because they are very strong.
Understanding engines helps us see how our machines work. Most of the vehicles you see on the road rely on these cycles. The power of the engine depends on how much air it can take in. It also depends on the speed, or RPM, of the engine.
Engineers must also think about the fuel used. For example, gasoline has an octane rating to show how it resists igniting too early. This helps keep the engine safe and working well. It is amazing how these small movements create so much movement in our world.
A four-stroke engine is a type of internal combustion engine. Internal combustion means the fuel burns inside the engine to create power. This engine design is incredibly common in modern land transport. You can find them in automobiles, trucks, and motorcycles. They also power diesel trains and light aircraft.
The engine works by moving a piston up and down inside a cylinder. This movement turns a part called a crankshaft to create mechanical work.
The engine operates through a four-step process called a cycle. Each step is known as a stroke. The first is the intake stroke, also called induction or suction. The piston moves from top dead center (T.D.C.) to bottom dead center (B.D.C.). During this stroke, the intake valve opens. The downward motion of the piston creates a partial vacuum, or negative pressure. This suction pulls an air-fuel mixture into the cylinder.
The second step is the compression stroke. The piston moves from B.D.C. back up to T.D.C. Both the intake and exhaust valves remain closed during this stage. This movement squeezes the air-fuel mixture tightly together. Compressing the mixture prepares it for ignition.
The third step is the power stroke, which is also called combustion or ignition. This happens at the start of the second revolution of the crankshaft. At T.D.C., a spark plug ignites the compressed mixture in gasoline engines. In diesel engines, the heat from high compression causes ignition. This explosion forcefully pushes the piston back down to B.D.C.
The final step is the exhaust stroke, or outlet. The piston returns from B.D.C. to T.D.C. once again. During this movement, the exhaust valve opens. This action expels the spent air-fuel mixture through the exhaust port.
After these four strokes, the cycle begins again. This continuous process allows the engine to provide steady power to a vehicle.
Engine history involves many important inventors and discoveries. In 1860, Jean Joseph Etienne Lenoir built an engine in Paris. It ran on illuminating gas and produced only 2 horsepower.
Nicolaus Otto studied Lenoir's engine and realized compression improved efficiency. In 1876, Otto and Eugen Langen created the first engine that compressed fuel before combustion. This was much more efficient than previous designs. Later, Gottlieb Daimler and Wilhelm Maybach developed the first high-speed Otto engine in 1883. They even built the first vehicle powered by an internal combustion engine in 1885.
There are several variations of the four-stroke cycle. James Atkinson invented the Atkinson cycle in 1882. This design focuses on efficiency rather than power density. It uses a unique crankshaft to make the power stroke longer than the compression stroke.
Modern hybrid vehicles, such as the Toyota Prius, often use this cycle.
Another major type is the diesel engine. Rudolf Diesel developed a high-compression engine in 1893. It uses heavy fuel that ignites from the heat of compression rather than a spark.
These are often used for heavy-duty tasks.
Engine performance depends on many scientific factors. The maximum power is determined by how much air the engine can ingest. Efficiency is also affected by the air-to-fuel ratio and the fuel's energy value. Engineers must manage the octane rating in gasoline engines. Octane measures how much a fuel resists self-ignition. A higher octane rating allows for higher compression ratios. This extracts more energy and prevents damage from pre-ignition.
In diesel engines, engineers look at the Cetane rating. This measures how easily the fuel will ignite. Understanding these principles allows engineers to build faster and more efficient machines.
Where will your curiosity go next?
🖼️ Images & Media (13)
+ 1 more
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.