Planes have parts that move.
These parts help the pilot steer. They move the air to turn the plane. This keeps the plane steady in the sky. It helps us fly safely.
Can you see the moving parts?
Planes have parts that move.
These parts help the pilot steer. They move the air to turn the plane.
One part is on the wing. It helps the plane roll. Another part is on the tail. It helps the nose go up or down. A third part is also on the tail. It helps the nose turn left or right. These parts make flying stable.
Now the pilot can fly in any direction.
Pilots use moving parts to steer an airplane. These parts are called flight control surfaces. They work by moving the air. This creates a force that turns the plane.
There are three main ways a plane moves. The first is roll. This is when one wing goes up and the other goes down. Pilots use ailerons to do this. Ailerons are hinged parts on the back of each wing.
When the pilot moves the controls, the ailerons move in opposite ways. This changes the lift on each wing.
The second way is pitch. This moves the nose up or down. Pilots use elevators for pitch. Elevators are on the back of the tail. When they move up, the tail goes down. This makes the nose go up.
The third way is yaw. This turns the nose left or right. The rudder controls yaw. The rudder is on the vertical part of the tail. Pilots use pedals to move it. Moving the rudder pushes the tail to one side. This makes the nose point the other way.
Pilots need special tools to steer an airplane through the sky. These tools are called flight control surfaces. They are aerodynamic devices that help a pilot change the aircraft's flight attitude. Without them, a plane could not stay stable or move in different directions. These surfaces work by changing how air flows over the plane. By moving these parts, a pilot can create forces that rotate the aircraft. This allows the plane to move along three different axes of rotation.
An aircraft can rotate around three axes that meet at its center of gravity. The first is the longitudinal axis, which runs from the nose to the tail. Rotating around this axis is called roll, or bank. Ailerons are the main surfaces used to control this roll. They are mounted on the trailing edge of each wing near the tips. When one aileron goes up, the other goes down. This creates different amounts of lift on each wing to tilt the plane.
The second way a plane moves is called pitch. This happens around the transverse axis, which goes from wingtip to wingtip. To change the pitch, pilots use elevators located on the tail. These elevators are hinged parts of the horizontal stabilizer. If a pilot pulls the control stick back, the elevators move up. This pushes the tail down and makes the nose point up. This movement is very important for changing the direction of the flight.
The third movement is called yaw, which happens around the vertical axis. The vertical axis runs from the top of the plane to the bottom. A rudder is the primary surface used to control yaw. It is usually attached to the vertical stabilizer on the tail. Pilots move the rudder by using pedals with their feet. Pushing a pedal moves the rudder to one side. This pushes the tail in the opposite direction to turn the nose.
Learning to control these surfaces was a huge step for early flight. The Wright brothers are credited with making the first practical control surfaces. They even used a method called wing warping to control roll. This meant they bent the outer edges of the wings. However, this could put too much pressure on the wing structure. Later, Glenn Curtiss developed ailerons to solve this problem. These hinged surfaces are much easier to build into a plane.
Flight control surfaces are aerodynamic devices that allow a pilot to adjust an aircraft's flight attitude. These surfaces are essential for managing movement along three specific axes of rotation. Without effective controls, early fixed-wing aircraft could generate enough lift to leave the ground but lacked stability. Modern aircraft use these surfaces to navigate through the air by deflecting the passing air stream. This redirection of airflow creates unbalanced forces that rotate the plane around its center of gravity.
An aircraft rotates around three perpendicular axes that intersect at its center of gravity. The first is the longitudinal axis, which runs from the nose to the tail. Rotation around this axis is called roll, and the resulting angle is known as the bank. To control roll, pilots primarily use ailerons. These are mounted on the trailing edge of each wing near the wingtips.
Ailerons function by moving in opposite directions to create differential lift. When a pilot moves the control to the left, the left aileron moves up while the right aileron moves down. The raised aileron reduces lift on that wing, while the lowered aileron increases it. This imbalance causes the aircraft to roll into a bank. While ailerons are the primary tool for roll, larger aircraft may also use spoilerons on the upper wing surface to assist.
The second axis is the transverse axis, which passes from wingtip to wingtip. Rotation around this axis is called pitch, which changes the vertical direction of the nose. The primary surfaces for pitch control are the elevators. These are moveable parts of the horizontal stabilizer, hinged to the back of the tail. When a pilot pulls the control stick backward, the elevators move up. This action pushes the tail down, forcing the nose to pitch upward.
Pitching the nose up changes the wings' angle of attack. This increases the lift generated by the wings but also increases drag. Some specialized aircraft, like the MD-80, use a servo tab within the elevator to help move the main surface. In a canard arrangement, the elevators are located on a foreplane at the front of the aircraft. In that specific design, pulling the stick back causes the elevators to move down to increase front lift.
The third axis is the vertical axis, which runs from the top of the aircraft to the bottom. Rotation around this axis is called yaw, which changes the direction the nose points. The rudder is the primary control surface for yaw. It is typically mounted on the trailing edge of the vertical stabilizer. Unlike other controls, the rudder is usually operated by the pilot using foot pedals. Pushing the right pedal deflects the rudder to the right, pushing the tail left and causing the nose to yaw right.
Using these controls often creates secondary effects that a pilot must manage. For example, ailerons can cause adverse yaw. When ailerons create more lift on one wing, they also create more induced drag on that same side. This drag pulls the nose in the opposite direction of the intended roll. Pilots often counteract this by using the rudder. Additionally, the rudder itself can cause a rolling tendency. As the aircraft yaws, the faster-moving wing generates more lift, causing the plane to bank.
History shows that developing these controls was a major milestone in aviation. The Wright brothers are credited with developing the first practical control surfaces. They initially used a technique called wing warping to control roll. This involved physically manipulating the outer trailing edges of the wings. However, wing warping put significant pressure on the wing structure and could lead to failure. To improve this, Glenn Curtiss developed hinged ailerons. These surfaces were easier to build into a structure and avoided the stresses of warping.
Modern aircraft may use various configurations for these surfaces. Some use elevons, which combine the functions of elevators and ailerons on the trailing edge of a delta wing. Others may use a V-shaped tail where the moving parts act as both rudder and elevator. While the specific hardware can change, the fundamental goal remains the same: using airflow to control rotation.
Where will your curiosity go next?
🖼️ Images & Media (8)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.