Wire is a long piece of metal.
It is round and bendy. People use it to make pretty jewelry. It also helps carry power to your home. It is very useful! Can you find a wire near you?
Wire is a long, thin bar of metal.
It is round and bendy. To make it, people pull metal through a small hole. This makes the metal much thinner.
Some wires are just one solid piece. These are strong but hard to bend. Other wires use many tiny strands bundled together.
These many strands make the wire very easy to bend. People use these for things like computer mouse cords. Wire is a very helpful tool for our world.
A wire is a long, thin bar of metal.
Most wires are round. However, they can also be square or hexagonal.
To make wire, people use a way called drawing. This means pulling metal through a small hole. We call this hole a die.
The die can be made of hard steel. For very fine work, people use diamonds or rubies. These stones stay the right size for a long time.
There are two main types of wire. The first is solid wire. This is one single piece of metal. It is strong and cheap to make.
It is good for things that do not need to bend.
The second type is stranded wire. This is made of many tiny wires bundled together. Stranded wire is much easier to bend. It is used for things like computer mouse cords. Using more strands makes the wire even more flexible. For example, a heavy cable might have over 5,000 tiny strands!
Many wires are covered in plastic. This is called insulation. It helps keep the electricity inside the wire.
Some cables even have many layers to protect them.
A wire is a long, thin bar made of metal. Most wires are round, but they can also be square or hexagonal.
These different shapes help them work for specific jobs. Some wires are made for decoration, while others are made for technical uses. For example, some wires are used in the voice coils of loudspeakers.
Wires are also used to carry electricity or signals in telecommunications. They can even be used as heavy ropes to hold up large loads.
To make wire, manufacturers use a way called drawing. This involves pulling metal through a small hole in a hard tool called a die.
A die can be made of hard steel or cast iron. For very fine work, people use diamonds or rubies because they do not change size easily. If a metal die gets too big, workers can hammer the hole back to the right size.
Sometimes, wire is made by rolling twisted metal strips between flat surfaces. To make electrical wires safer, they are often covered in insulation like plastic or rubber. This insulation is usually added by a machine called an extruder.
People have been using wire for a very long time. In ancient Egypt, people used a strip drawing technique during the 2nd Dynasty.
They would pull metal strips through holes in stone beads to make thin tubes. In Europe, people used a method called swaging to make square or hexagonal wires. This happened during the Bronze and Iron Ages. In England, wire was drawn as far back as the medieval period.
One of the first wire mills in Great Britain was set up in Tintern around 1568.
There are two main ways to build a wire: solid or stranded.
Solid wire is one single piece of metal. It is cheap to make and very strong against the environment. Stranded wire is made by bundling many small wires together. This makes the wire much more flexible and harder to break when it moves.
For example, a heavy cable might contain 5,292 tiny strands. Most stranded wires use at least 7 strands, with one in the middle and six around it.
We see different types of wire in our everyday lives. You might see thick cables hanging overhead to carry power to homes.
You also use stranded wires every day in things like computer mouse cables or headphone wires. Some special cables, called coaxial cables, have layers to protect the signal.
Even musical instruments use wire, like the strings on a piano.
Whether it is a tiny strand in a gadget or a huge cable under the sea, wire helps our modern world work.
A wire is a long, thin, and flexible bar of metal. While most wires are cylindrical, they can also be made in square, hexagonal, or flattened rectangular shapes.
These different shapes serve specific purposes. Some are used for decoration, while others are designed for technical tasks. For example, flattened wire is used to make edge-wound coil springs, like a Slinky toy.
Wires are also essential for carrying electricity and telecommunications signals. In these roles, a wire might be a single solid piece or many strands bundled together into a cable.
To create wire, manufacturers use a process called drawing. This involves pulling metal through a small hole in a hard tool called a die or a draw plate.
By passing the metal through progressively smaller dies, the wire reaches its desired diameter. For very fine work, dies are made from precious stones like diamonds or rubies. These materials do not change size easily, which ensures the wire diameter remains accurate. If a metal die becomes too large, workers can hammer the hole back to its original size and then use a punch to drift it out. Sometimes, wire is also annealed, which means it is heat-treated to make it easier to draw or to improve its conductivity.
Electrical wires require protection to prevent short circuits. They are usually covered with insulating materials like plastic, rubber-like polymers, or varnish.
In modern manufacturing, an extruder is used to apply this insulation or jacketing. In the past, workers used treated cloth, paper, or oil-based products for insulation. For more complex setups, two or more wires can be wrapped concentrically to form a coaxial cable. This type of cable is often protected by additional layers of lead, aluminum sheathing, or steel taping.
To add these layers, stranding or covering machines wind the material onto the wire as it passes through at high speeds.
Humans have been shaping metal wire for thousands of years. In ancient Egypt, during the 2nd Dynasty, people used a strip drawing technique. They pulled metal strips through holes in stone beads to create thin, hollow tubes.
In the Bronze and Iron Ages in Europe, people used swaging to create square or hexagonal wires. Swaging involves striking a metal rod between grooved blocks or an anvil. By the middle of the 2nd millennium BCE, gold jewelry often featured wires with spiral seam lines. These were made by twisting strips and then rolling them between flat surfaces to make them solid. By the 8th to 10th centuries AD, the drawing method became the standard in the Old World.
In Great Britain, wire drawing has a long history dating back to the medieval period. For example, wire was used to make wool cards and pins in England.
The first wire mill in Great Britain was established at Tintern around 1568. Despite these mills, fine wire was often still drawn by hand well into the early 20th century. The complexity of wire manufacturing is seen in the way strands are organized. For instance, a large 2/0 wire can be made from 5,292 individual strands of No. 36 gauge wire. These strands are built up by first creating bundles of seven strands, then grouping those bundles into larger sets.
There are two primary forms of wire: solid and stranded.
Solid wire, or single-strand wire, consists of one continuous piece of metal. It is cheaper to make and provides great mechanical ruggedness. It is also resistant to corrosive environments because it has less surface area exposed to the elements. Stranded wire, however, is composed of many small wires bundled together. This makes the wire much more flexible and resistant to metal fatigue. Stranded wire is necessary for items that move often, such as computer mouse cables, musical instrument cables, or headphone wires.
The number of strands in a bundle affects how the wire performs. The simplest stranded wire uses 7 strands, with one in the center and six surrounding it. If a wire must undergo constant, repeated movement, such as in an assembly robot, manufacturers must use between 70 and 100 strands.
For high-frequency electrical applications, special types like litz wire are used. Litz wire features individual strands that are insulated and twisted in specific patterns to improve performance. This complexity allows wire to function in everything from massive submarine cables to the tiny components inside a smartphone.
Where will your curiosity go next?
🖼️ Images & Media (9)
More to explore
✨ What else?
Related topics you might enjoy
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.