Solar panels catch light from the sun.
They turn light into power. This power can run your toys. It can even light up a house. It is a clean way to get energy. Do you like the sun?
Solar panels catch light from the sun.
The light hits the panel. This makes power move through a wire.
This power can run your toys. It can light up a whole house. People put them on roofs. Some people put them in big fields. They are a clean way to get energy. This power comes from the sun. It is a very smart tool.
Solar panels help us use the sun.
Solar panels catch light from the sun to make electricity.
They use many small parts called photovoltaic cells. These cells use light to move tiny parts called electrons. This movement creates direct current electricity.
You can use this power for homes or even in space.
Most panels use a material called silicon. Many cells are joined together to make a solar panel. These panels are often put in groups called arrays.
Some panels are smart. They have special parts built inside them. These help the panel work even if a shadow falls on it.
Solar power is a clean way to get energy. It does not make greenhouse gas emissions. This helps the Earth. However, panels need sunlight to work. They also need to be kept clean. The cost of these panels has fallen a lot since 2010. This makes it easier for many people to use them.
Solar panels are clever devices that turn sunlight into electricity.
They use many small parts called photovoltaic cells to catch light. When light hits these cells, it makes tiny parts called electrons get excited. These electrons flow through a circuit to create direct current electricity. This power can run many devices or be kept in batteries.
Solar panels are often grouped together into larger systems called arrays. Most of these arrays are found on rooftops or in large solar farms.
To make electricity, the cells must work in a specific way. Most modules use crystalline silicon cells or thin-film cells.
The cells are connected to each other to increase the voltage and current. This creates the final power of the solar panel. The total power depends on the amount of light and the electrical load. Most panels are rigid, but some are semi-flexible.
A junction box on the back helps connect the panel to other things. Many systems also use an inverter to change the electricity type. This makes it ready for use in a home or a building.
People have been studying how light makes electricity for a long time. In 1839, a French physicist named Edmond Becquerel first saw this happen.
Later, in 1873, Willoughby Smith found that light could charge selenium. In 1881, Charles Fritts made the first commercial solar cell. It worked even in dim, diffused daylight. In 1939, Russell Ohl created a cell design that we still use today. He patented his special design in 1941. Finally, Bell Labs used this design in 1954 to make the first useful silicon solar cell.
Solar technology has grown very fast in recent years. Since 2010, the cost of solar electricity has fallen by 85%.
Between 1992 and 2023, the use of these cells grew exponentially. From 2016 to 2022, production grew by about 26% every year. By the end of 2022, the world had about 1,185 gigawatts of solar capacity. This supplied over 6% of the world's electricity demand.
Lower costs are helping many people in the Global South switch to solar. This helps them save money on expensive fuel imports.
Solar power is a clean and renewable way to get energy. It helps reduce greenhouse gas emissions compared to using coal or oil.
However, panels do rely on the intensity of the sunlight. They also need to be kept clean to work well. Some panels are even used in space to power spacecraft. These special cells provide a lot of power for every kilogram they weigh.
Whether on a roof or in space, solar panels help us use the sun.
A solar panel is a device that converts sunlight into electricity. It uses multiple solar modules made of photovoltaic (PV) cells. These cells use the photovoltaic effect to generate power. This process occurs when light hits materials that produce excited electrons. These electrons flow through a circuit to create direct current (DC) electricity. This electricity can power devices or be stored in batteries.
Solar panels are often grouped into larger arrays or systems. These systems are used for residential, commercial, and industrial needs. They are also essential for powering spacecraft in outer space.
To understand how they work, we must look at the cell construction. Most modules use wafer-based crystalline silicon cells or thin-film cells. The cells are connected electrically in series to increase voltage. They are then connected in parallel to increase current. This combination creates the total power of the solar panel. The power is measured in watts, which is voltage multiplied by current.
A PV junction box on the back acts as an output interface. Most systems also include an inverter. This device converts direct current into alternating current (AC) for standard use.
Manufacturers use different techniques to connect cells and improve efficiency. Early technology, called Aluminum back surface field (Al-BSF), used a full aluminum rear contact. Later, Passivated emitter rear contact (PERC) used a reduced aluminum face and a polymer film. This film helps capture more light. Newer Tunnel oxide passivated contact (TOPCon) uses smaller silver bus bars and an oxidation layer. Interdigitated back contact (IBC) moves all contacts to the back. This allows the entire front surface to capture sunlight.
Some advanced versions use tandem solar cells. These combine different cell chemistries to boost performance.
Solar technology has a long history of discovery. In 1839, Edmond Becquerel observed materials creating a charge from light. In 1873, Willoughby Smith discovered light could charge selenium. By 1881, Charles Fritts created the first commercial solar cell. It worked even in dim, diffused daylight. In 1939, Russell Ohl created a design used in modern panels. He patented this design in 1941. Finally, Bell Labs used his design in 1954. They created the first commercially viable silicon solar cell.
Solar energy has seen massive growth recently. Since 2010, the cost of solar photovoltaic electricity has fallen by 85%. Between 1992 and 2023, worldwide usage grew exponentially. From 2016 to 2022, production grew by about 26% annually. This means capacity doubles approximately every three years. By the end of 2022, global installed capacity reached 1,185 gigawatts (GW). This supplied over 6% of global electricity demand.
Lower costs help people in the Global South save money on fuel.
Different types of panels serve different purposes. Most modules use crystalline silicon, which made up 95% of production in 2021. Other markets use thin-film technologies like cadmium telluride. Bifacial cells are a special type that produce energy on both sides. They work best in high-albedo surroundings like snow. As of 2024, bifacial panels are leaders in utility-scale installations. For spacecraft, engineers use multi-junction solar cells. These are made of gallium arsenide and other semiconductors. They provide the highest power per kilogram for space travel.
Using solar power involves managing light and environment. The amount of light absorbed depends on the angle of incidence. Panels are often tilted to face the sun directly. Solar tracking mechanisms can adjust the tilt from dawn to dusk. This keeps the angle of incidence small to maximize energy.
Some modules use concentrators with lenses or mirrors. These focus light onto smaller, highly efficient cells. This can raise efficiency to around 45%. While solar is clean and renewable, it does require maintenance. Panels must be kept clean and depend on sunlight availability.
🖼️ Images & Media (21)
+ 9 more
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.