Pushing things makes pressure.
It happens when you push on a spot. A sharp knife has much pressure. This helps it cut food. A finger does not have much pressure. It cannot cut things. Can you feel pressure?
Pressure happens when you push on a surface.
It depends on how much space you use. A sharp knife has a tiny edge. This makes the pressure very high. That is why it can cut.
A finger is wide and flat. It spreads the push out. This makes the pressure low. It will not cut things.
We can measure pressure in many ways. Some people use the height of water. Others use the height of mercury.
Even the air around us has pressure. This is called air pressure. It helps keep our air close to Earth.
Pressure is a way to measure a push. It happens when a force hits a surface.
Pressure depends on the area of the surface. Area is the amount of space a surface covers. If you use a small area, the pressure is high. A sharp knife has a tiny edge. This concentrates the force. That is why a knife can cut. A finger is wide and flat. It spreads the force out. This makes the pressure low.
We use different units to measure pressure. The main unit is the pascal (Pa). One pascal is one newton of force on one square metre. People also use pounds per square inch, or psi.
Some tools use liquid to show pressure. We call these manometric units. They measure how high a liquid rises in a tube. Mercury is a heavy liquid used for this.
One unit called a torr is based on mercury.
Air also has pressure. This is called atmospheric pressure. It is the weight of the air around us. This pressure helps keep our air near Earth.
Pressure is a way to measure a push on a surface. It happens when a force hits an object at a right angle. Scientists use the symbol p or P to represent it. Pressure is a scalar quantity, which means it has no specific direction. While the force itself has a direction, the pressure stays the same even if the surface tilts.
This concept is very important in science. It helps us understand how liquids and gases behave in containers. It also helps us study how planets hold onto their air.
How pressure works depends on the area of the surface. Imagine pushing on a wall with your finger. You will not leave a mark because the force is spread out. Now imagine pushing a thumbtack into that same wall. The force is the same, but the tiny point concentrates it. This creates much higher pressure on one small spot.
A sharp knife works the same way. The thin edge has a very small area. This creates enough pressure to cut through things easily. If you use the flat side, the pressure is too low to cut.
There are many different ways to measure pressure. The main unit used by scientists is the pascal (Pa). One pascal is equal to one newton of force on one square metre. In the United States, people often use pounds per square inch (psi). Other units include the bar and the decibar. Oceanographers use decibars to measure the deep sea. This is helpful because pressure in the ocean increases by about one decibar for every metre of depth.
We can also measure pressure by how high a liquid rises in a tube. This is called a manometric unit. People often use mercury or water for this task. Mercury is very dense, so it allows for a shorter tube. One unit called the torr is based on the height of a mercury column.
Doctors use these units to check blood pressure. Divers also use special units like metres of sea water (msw) to stay safe underwater.
Pressure is happening all around us right now. The air in our atmosphere has pressure because of Earth's gravity. This gravity pulls the gas toward the planet. This keeps our air from drifting away into space. In a container, gas pressure comes from molecules hitting the walls. These tiny molecules are always moving in random directions. When they hit a surface, they create the push we call pressure.
Pressure is a fundamental physical concept used to describe how force is distributed. Specifically, pressure is the force applied perpendicular to a surface per unit area. Scientists use the symbol p or P to represent this value. The IUPAC recommends using a lower-case p for pressure. However, many researchers use an upper-case P depending on their specific field of study. Pressure is a scalar quantity, which means it has no specific direction. While the force acting on a surface has a direction, the pressure itself does not.
The relationship between force, area, and pressure is a matter of concentration. Mathematically, pressure is calculated by dividing the magnitude of the normal force by the area of the contact surface. If you apply the same force to a larger area, the pressure decreases. If you apply that same force to a much smaller area, the pressure increases significantly. Consider a thumbtack versus a finger. Pushing a finger against a wall applies force, but the area is large, so the pressure is low. A thumbtack concentrates that same force onto a tiny point. This creates enough pressure to damage the surface.
Pressure can be measured in many different ways depending on the scientific discipline. The International System of Units (SI) uses the pascal (Pa) as the standard unit. One pascal is defined as one newton of force per square metre. In the United States, the imperial system often uses pounds per square inch (psi). Other common units include the bar and the decibar. Meteorologists often use the hectopascal (hPa) to measure atmospheric air pressure. This is the same as the older unit called the millibar (mbar).
Another way to express pressure is through manometric units. These units measure the height of a column of fluid in a device called a manometer. Common choices for these fluids are water or mercury. Mercury is often preferred because it is very dense. A high density allows for a shorter column to measure a given pressure. This makes the measuring tools smaller and easier to use. One common manometric unit is the torr, which is approximately equal to one millimetre of mercury.
In specific environments, scientists use specialized units to ensure accuracy. Oceanographers often measure underwater pressure in decibars (dbar). This is useful because pressure in the ocean increases by roughly one decibar for every metre of depth. Divers use units like metres of sea water (msw) or feet of sea water (fsw). These units help them manage pressure exposure and safety in diving chambers. It is important to note that 10 msw is not exactly the same as a linear metre of depth. Instead, 1 msw is defined as 0.1 bar, or 10,000 Pa.
There are different ways to report pressure values, such as gauge and absolute pressure. Gauge pressure is the pressure measured relative to the ambient atmospheric pressure. For example, a car tire might be listed at 32 psi gauge. This means the pressure inside is 32 psi higher than the air outside. Absolute pressure, however, is the total pressure including the atmosphere. When calculating properties like gas density, scientists must use absolute pressure. Using gauge pressure alone can lead to incorrect calculations of how dense a gas is.
At a microscopic level, pressure in a gas comes from constant motion. Even in a gas that looks still, individual molecules are moving randomly in all directions. When these molecules are confined in a container, they collide with the walls. These constant collisions create the force that we measure as pressure. On a much larger scale, planets have atmospheres because of gravity. The gravitational pull of a planet creates a pressure gradient. This force balances the outward push of the gas, preventing the atmosphere from escaping into space.
🖼️ Images & Media (6)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.