Special fuel helps big planes fly.
It goes into the engines. This fuel helps planes move fast. It keeps them up in the sky. We use it to travel far. Do you like to fly in planes?
Jet fuel helps big planes fly.
This fuel can look clear or like straw. It is a mix of many things.
Some fuel stays liquid in very cold air. This helps planes fly in cold places. Other fuel is used for big planes.
It must be very clean. Water in the fuel can freeze. This might block the pipes. We use heaters to keep the fuel moving. It is amazing how fuel helps us travel!
Jet fuel is a special liquid used for planes.
It powers engines called gas turbines. This fuel can look clear or like straw. It is a mix of many different parts. Because the mix changes, we define it by how it works. We do not use one single recipe.
Most planes use Jet A or Jet A-1. Jet A-1 is used in most of the world. It stays liquid in very cold air. It also has a special additive to stop static electricity. This keeps the fuel safe. In very cold places like Alaska, people use Jet B. This fuel works well in extreme cold.
Fuel must be very clean. Water can get into the fuel. In the sky, it gets very cold. This causes water to turn into ice. Ice can block the pipes that carry fuel. To stop this, planes use fuel heaters. This keeps the fuel flowing so the plane can fly safely.
Jet fuel is a special liquid used to power aircraft engines. These engines are called gas turbines.
Most jet fuel looks clear or like the color of straw. It is not just one single thing. Instead, it is a mixture of many different hydrocarbons. Hydrocarbons are tiny parts that come from petroleum. Because the mix changes depending on where it comes from, we cannot use one exact recipe. We define jet fuel by how well it performs instead.
How the fuel works depends on the type of engine and the weather. Turbine engines can use many kinds of fuel because the fuel is sprayed into a hot chamber. This heat helps the fuel burn. Most commercial planes use Jet A or Jet A-1. Jet A-1 is very common around the world. It has a lower freezing point than Jet A. This helps it stay liquid in very cold air. It also has an additive to stop static electricity.
People have used different fuels for a long time. During World War II, some early jet planes used a special fuel called J2. They also used diesel or gasoline. Later, standards were made to keep flying safe. British standards came from using paraffin for lamps. American standards came from using aviation gasoline. Today, groups like ASTM International make the rules for civilian fuel. In the United States, the Department of Defense makes rules for military fuel.
There are many specific types of jet fuel used today. Jet A is mostly used in the United States. Jet A-1 is the standard for most other countries. In Russia, they use a type called TS-1. This fuel also works well in the cold. In places like Alaska or northern Canada, people use Jet B. Jet B is a mix of kerosene and gasoline. It has a very low freezing point for extreme cold. However, it is more dangerous to handle than other types.
Keeping fuel clean is a very important job. Fuel must be free from water. If water gets in, it can turn into ice in the cold sky. Ice can block the pipes that carry fuel to the engine.
To prevent this, planes often use fuel heaters. Workers can also check for water using a special test. They use a filter pad that turns green if there is too much water. This helps keep the aircraft safe during flight.
Jet fuel, also known as aviation turbine fuel (ATF) or avtur, is a specialized liquid used to power gas-turbine engines. These engines are found in many modern aircraft, including commercial jets, helicopters, and turboprops. Jet fuel is typically colorless or straw-colored in appearance. Unlike many other substances, jet fuel is not defined by a single chemical formula. Instead, it is a mixture of various hydrocarbons, which are molecules made of carbon and hydrogen. Because the exact mix depends on the petroleum source, engineers define jet fuel by its performance specifications. This means the fuel must meet certain rules for how it behaves, such as its freezing point or smoke point.
The way jet engines use fuel is different from older piston engines. Older planes used high-octane gasoline, known as avgas, which required specific volatility and ignition temperatures. In contrast, turbine engines function more like diesel engines. They inject fuel directly into a hot combustion chamber. This process allows them to operate using a wide range of fuels. Most modern turbine aircraft use fuels with higher flash points. A flash point is the lowest temperature at which a liquid gives off enough vapor to ignite. Using fuels with higher flash points makes them safer to transport and handle on the ground.
There are several distinct types of jet fuel used around the world today. The most common are Jet A and Jet A-1, which follow international standards. Jet A is primarily used in the United States and a few Canadian airports like Toronto and Vancouver. Jet A-1 is the standard used in most other parts of the world. The main difference between them is that Jet A-1 has a lower freezing point and requires an antistatic additive. Another type is Jet B, which is a "wide-cut" fuel made of about 30% kerosene and 70% gasoline. Jet B is used in extreme cold, such as in Alaska or northern Canada, because it stays liquid at very low temperatures. However, its lighter composition makes it more dangerous to handle than kerosene-based fuels.
Different regions also use their own specific standards and grades. In Russia and CIS member states, the principal grade is TS-1, which is governed by GOST standards. TS-1 is designed for enhanced cold-weather performance and has a very low freezing point below -60°C. Military organizations often use a different classification system known as JP (Jet Propellant) numbers. For example, Jet A-1 is similar to the military JP-8, and Jet B is similar to JP-4. These military fuels can be highly specialized for specific mission needs.
History shows how fuel technology has evolved alongside aircraft design. During World War II, the first widespread axial compressor jet engine was the Junkers Jumo 004. This engine, used on the Messerschmitt Me 262A, burned either diesel or a special synthetic fuel called J2. While gasoline was an option, it was not ideal because of high fuel consumption. After the war, standards were established to ensure safety and reliability. British standards were originally based on paraffin used for lamps. American standards were derived from aviation gasoline practices. Over time, these specifications were adjusted to balance engine performance with fuel availability.
To keep engines running smoothly, various additives are often mixed into the fuel. Antioxidants are added to prevent the buildup of gum inside the system. Antistatic agents, such as Stadis 450, help dissipate static electricity to prevent sparks. Corrosion inhibitors protect the metal parts of the engine, while fuel system icing inhibitors (FSII) prevent ice from forming. Biocides are also used to stop the growth of bacteria and fungi in the fuel tanks. One common biocide is Biobor JF, which is currently the only one approved for aviation use. Other additives, like metal deactivators, help maintain the thermal stability of the fuel.
One of the most critical safety concerns is the presence of water in the fuel. As aircraft fly through the upper atmosphere, the temperature in the fuel tanks drops significantly. This cold can cause dissolved water to precipitate out of the fuel. Because water is denser than fuel, it sinks to the bottom of the tank in droplets. These droplets can become "supercooled," meaning they stay liquid even below 0°C. If these droplets hit a surface, they can freeze and block fuel inlet pipes. To prevent this, commercial aircraft often use fuel heaters. Workers also use chemical tests, such as water-sensitive filter pads, to ensure water levels do not exceed 30 parts per million (ppm).
Where will your curiosity go next?
🖼️ Images & Media (5)
More to explore
✨ What else?
Related topics you might enjoy
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.