Nepedia
Back to Discover
Advanced Reader
💻

Flat-panel display

technology Maturity 9-11 war conflict Next article →

This article covers sensitive topics: war_conflict. Parents can manage visibility in Parental Controls.

A flat-panel display (FPD) is an electronic device used to present visual information like text or images. These displays are essential in modern life, appearing in consumer electronics, medical tools, transportation systems, and industrial equipment. Compared to the bulky cathode-ray tube (CRT) televisions of the past, flat-panel displays are much thinner and lighter. They also offer better linearity and significantly higher resolution. While older consumer CRT televisions reached a maximum of 1080i, many modern interactive panels can display 1080p or even 4K resolution.

Expo line passenger information display.
Expo line passenger information display.

Flat-panel technology can be categorized into two main types: volatile and static. Volatile displays, such as liquid-crystal displays (LCD), require constant electrical power to maintain an image. These screens must periodically refresh their pixels many times per second to retain their state. If the power is removed, the pixels lose their coherent state and the image fades away. In contrast, static displays use materials with bistable color states. An example is e-ink technology, which retains its content even when the power is turned off.

Amazon Kindle 3
Amazon Kindle 3

Liquid-crystal displays (LCD) are a very common type of volatile display. An LCD works by sandwiching a thin layer of liquid crystal between two glass plates. These plates carry transparent electrodes, and two polarizing films are placed on either side. By applying a controlled electric field between the electrodes, the display can change the polarizing properties of the liquid crystal. This is achieved through different alignment methods, such as twisted nematic (TN), in-plane switching (IPS), or vertical alignment (VA). To create colors, the display applies red, green, and blue filters to individual subpixels.

Expo line passenger information display.
Expo line passenger information display.

Many LCDs are actually LED-backlit, meaning they use light-emitting diodes (LEDs) as an illumination source. While older large LCDs used cold-cathode fluorescent lamps (CCFL), most modern screens use LED technology. Another advanced version is the quantum-dot light-emitting diode (QLED). This technology, used by brands like Samsung, uses quantum dots to create unique light when hit by blue LEDs. This enhances the color gamut of the LCD panel. Some displays also use organic light-emitting diodes (OLED). In an OLED, an organic compound film emits light directly in response to an electric current.

Taipei Mini-Big Egg 02
Taipei Mini-Big Egg 02

The journey toward thin screens began decades ago. In 1954, General Electric proposed a flat-panel TV based on radar monitor research. Although they published the basics, they did not build a working model at that time. In 1958, the Aiken tube became the first production flat-panel display, used mostly in military systems. That same year, the Philco Predicta was released as a relatively flat CRT setup, but it was a commercial failure. In 1964, researchers at the University of Illinois invented the plasma display panel. Plasma displays work by applying voltage to electrodes in a gas-filled gap, causing segments of gas, such as neon, to glow.

Zürich Hauptbahnhof (Ank Kumar Infy) 20
Zürich Hauptbahnhof (Ank Kumar Infy) 20

Technological breakthroughs in the mid-20th century paved the way for modern high-resolution screens. In 1959, Mohamed M. Atalla and Dawon Kahng invented the MOSFET, a type of transistor. Later, in 1962, Paul K. Weimer developed the thin-film transistor (TFT), which is a specific type of MOSFET. This was crucial because modern high-quality displays use TFT-based active-matrix displays. In 1968, Hewlett-Packard introduced the first usable LED display, which eventually replaced Nixie tubes for numeric displays. By 1987, Ching W. Tang and Steven Van Slyke at Eastman Kodak created the first practical OLED device. Finally, in 2007, Sony released the XEL-1, the world's first OLED television.

Taipei Mini-Big Egg 02
Taipei Mini-Big Egg 02

Today, flat-panel displays have almost completely replaced CRT displays as of 2016. Their ability to be lightweight and consume less power made them perfect for the rise of portable electronics. In the 2010s, they became the standard for laptops, mobile phones, and portable cameras. The development of the thin-film transistor in the 1960s and 1970s by researchers like T. Peter Brody allowed for the active-matrix LCDs we use now. These advancements have connected various fields, from the large-scale LED displays seen in arenas to the tiny screens on a smartphone.

Taipei Mini-Big Egg 02
Taipei Mini-Big Egg 02
681 words

Where will your curiosity go next?

Keep exploring at your chosen reading level.

🖼️ Images & Media (4)
File:Zürich Hauptbahnhof (Ank Kumar Infy) 20.jpg
Zürich Hauptbahnhof (Ank Kumar Infy) 20.jpg
File:Expo line passenger information display..jpg
Expo line passenger information display..jpg
File:Taipei Mini-Big Egg 02.jpg
Taipei Mini-Big Egg 02.jpg
File:Amazon Kindle 3.JPG
Amazon Kindle 3.JPG
More to explore

🔬 Go deeper

More advanced topics to explore

🪜 Step back

Simpler topics to build understanding

What is Nepedia?

A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.