Some wells do not go straight down.
They can go sideways too. This helps reach oil under a lake. It also helps reach oil under a town. This way, we do not hurt the land. Can you imagine a hole that turns?
Most wells go straight down. But some wells can turn. This is called slant drilling.
It lets people reach oil in new ways. They can reach oil under a lake. They can reach oil under a town.
This helps keep the land safe. It also keeps the ground from being hurt. Tools help the drill find the right path. These tools send news back to the top. This tells workers where the hole is going. It is like a map for the drill.
Most wells go straight down. But some wells can turn. This is called directional drilling.
This way of drilling lets people reach things at an angle. They can reach oil under a lake or a town. They can even reach oil under a difficult area of ground. This helps keep the land safe. It also means fewer rigs are needed on the surface.
To do this, workers must know exactly where the drill is. They use a survey to find the path. A survey is a set of measurements. It looks at three things. It looks at the depth. It looks at the inclination, or the tilt of the hole. It also looks at the azimuth, which is the direction.
Modern tools make this easier. Some tools use mud motors. These use the power of drilling mud to turn the drill bit. Other tools are called rotary steerable systems. These allow workers to steer the drill while the pipe is spinning. This helps reach targets that were once impossible to find.
Directional drilling is a special way to make holes that do not go straight down. Most wells go vertically, but these bores can turn at an angle. This method is very useful for reaching things deep underground.
For example, it can reach oil under a town or a lake. It can also reach oil under ground that is hard to drill through. This helps keep the surface of the land safer and cleaner.
To steer the drill, workers must take a survey. A survey is a set of measurements that shows the path. It tracks the depth of the hole along its course. It also measures the inclination, which is how much the hole tilts. Finally, it measures the azimuth, which is the direction of the hole.
Workers use tools to send this data back to the surface. This helps them make sure the drill follows the planned blue path. They can make small changes to the rotation speed to stay on track.
People learned that wells did not always need to be vertical. This idea grew in the late 1920s during some legal cases. In 1934, H. John Eastman and Roman W. Hines helped save a field in Texas. They worked with George Failing from Oklahoma to help. Failing had made a portable drilling truck in 1931. This allowed people to drill many slanted wells very quickly. This work helped stop a large fire in the Conroe oil field.
New tools have made this work much faster and easier. In the 1970s, mud motors became very common. These motors use the power of drilling mud to turn the bit. This lets the drill pipe stay still while the bit keeps spinning.
There are also rotary steerable systems, or RSS. These tools let workers steer the drill even while the pipe is rotating. This makes it possible to reach spots that were once impossible to touch.
Directional drilling connects to many things we see every day. It can be used to install new utilities under our streets. It can also be used to reach coal bed methane. Some wells can even be used as relief wells. A relief well can go into a troubled well to stop a blowout. This is done by pumping heavy fluid to stop the pressure. This keeps the area around the well much safer for everyone.
Directional drilling, often called slant drilling, is the practice of creating non-vertical bores. Instead of drilling straight down, engineers design paths that curve or angle through the Earth. This technology is vital for accessing resources that are difficult to reach. It allows workers to target specific reservoirs located under obstacles like lakes, towns, or complex rock formations.
By using these angled paths, companies can also group many wellheads in one single surface location. This reduces the amount of land disturbed by drilling rigs and lowers overall costs.
To guide a drill bit through the ground, engineers must perform a survey. A survey is a collection of three specific measurements taken at various points along the borehole. First, they measure the measured depth, which is the length of the hole along its actual course. Second, they measure the inclination, which is the angle of deviation from the vertical. Third, they measure the magnetic azimuth, which is the direction relative to a geographic grid.
These measurements allow drillers to track their progress and ensure they follow a predetermined "blue path."
There are several distinct types of directional drilling used for different goals. Oilfield directional drilling focuses on reaching energy reservoirs at specific angles. Utility installation directional drilling is used to place pipes or cables underground without digging large trenches. Horizontal directional boring, or HDD, is a specific method for making underground paths. Finally, surface in seam (SIS) drilling horizontally intersects a vertical target to extract coal bed methane.
The history of this field began with a slow realization that wells did not need to be vertical. In the late 1920s, lawsuits emerged because wells from one property were crossing boundaries into adjacent reservoirs. This legal tension drove the development of small tools to survey wells during the drilling process. A major breakthrough occurred in 1934 when H. John Eastman, Roman W. Hines, and George Failing used directional techniques to save the Conroe oil field in Texas. Failing had invented a portable drilling truck in 1931, which allowed for the rapid drilling of slanted relief wells. These wells helped extinguish a massive gas fire by relieving enormous pressure.
Technological advances in the 1970s transformed how these holes are steered. The introduction of downhole drilling motors, also known as mud motors, changed everything. These motors are driven by the hydraulic power of drilling mud circulated down the drill string. This allows the drill bit to rotate at the cutting face while the main drill pipe stays stationary. To change direction, drillers use a "bent sub," which is a piece of bent pipe placed above the motor. This allows the wellbore to curve without needing to pull the entire drill string out of the hole.
Modern drilling has become even more efficient through Measurement While Drilling (MWD) tools. These tools use methods like mud pulse telemetry or electromagnetism to send data back to the surface in real time. This allows for immediate adjustments to the drill path. Some tools, called rotary steerable systems (RSS), allow for directional control even while the drill pipe is rotating. This is much faster and more cost-effective than "sliding," where the pipe must be held still to steer. RSS technology allows access to formations that were previously considered uncontrollable.
The significance of directional drilling is seen in its ability to reach extreme distances. Current record holders can manage wells that reach targets far laterally from the surface location. These wells can reach these targets even at a true vertical depth of only a few hundred feet. Beyond resource extraction, this method serves a critical safety role through relief wells. If a well experiences a blowout, a relief well can be drilled from a safe distance to intersect the original bore. Heavy "kill fluid" is then pumped into the relief well to suppress the high pressure and stop the blowout.
Where will your curiosity go next?
🖼️ Images & Media (3)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.