You can twist things.
This is called torsion. It happens when you turn an object. A long rod can twist too. This can even break things like chalk.
Can you twist a piece of chalk?
You can twist things.
This is called torsion. It happens when you turn an object.
When you twist a rod, it can bend. Some shapes will warp or change shape. This happens because of the force you use to turn it.
The most stress happens on the outside of the rod.
Making the surface smooth can help it last longer. This stops the rod from breaking too soon.
Twisting can even break things like chalk. The chalk might crack in a spiral shape. This shows how the force moves through the object.
Scientists use these ideas to build big things. They use them to make parts for power plants.
Torsion is the twisting of an object.
This happens when you apply torque. Torque is a force that turns an object. When you twist a rod, it can change shape. In shapes that are not round, this is called warping. This means the flat parts of the object do not stay flat.
The most stress happens on the outer surface of the rod.
Rough spots can make this stress even worse. To help parts last longer, engineers often polish them. This makes the surface very smooth.
Twisting can also break things. If you twist a piece of chalk, it may crack. The crack often moves in a spiral shape. This is called a helical angle. In thin, hollow tubes, too much twisting can cause wrinkles.
Scientists use these facts to build big machines. For example, they design shafts for steam turbines.
These shafts carry a lot of power in nuclear plants. Engineers must calculate the right size so the metal does not fail. They use math to find the best shape and strength.
Torsion is the twisting of an object. This happens when a force called torque is applied.
Engineers study this to understand how things change shape. We measure this change by looking at the angle of twist. This is how much a part rotates from its starting spot. When a shape is not a circle, it might also warp. Warping means the flat parts of the object do not stay flat.
Twisting creates stress inside the material. This is called torsional shear stress. The highest stress always happens on the very outer surface. This is because the radius is at its widest there. Rough spots on the surface can make this stress even worse. To help parts last longer, engineers often polish them to a fine finish. This smooth surface helps reduce the maximum stress in the shaft.
Twisting can also cause objects to break or fail. If a shaft is made of brittle material, it might crack. The crack usually starts at the surface and moves toward the center. This crack often follows a 45-degree helical shape. You can see this if you twist a piece of blackboard chalk.
For thin, hollow shafts, too much twisting can cause wrinkles. These wrinkles also form at a 45-degree angle.
Scientists use math to build very large machines. For example, they design shafts for steam turbines in nuclear power plants.
These shafts carry huge amounts of power, like 1000 MW. In Europe, electricity has a frequency of 50 Hz. In North America, the frequency is 60 Hz. Engineers must calculate the exact size needed for these shafts. A shaft might need to be 69 cm wide to stay safe.
Special tools can help us study how materials move. A torsional resonator is a system used to study fibers. It uses a rod attached to a fiber to create twisting motion. This helps scientists see how much energy a material loses. Researchers like Valtorta and Mazza have used these tools. They used them to study the properties of soft biological tissue. This helps us understand how living things behave under stress.
In the field of solid mechanics, torsion is the twisting of an object caused by an applied torque. Torque is a force that causes rotation. When an object undergoes torsion, it experiences strain, which is a type of angular deformation. This deformation is measured by the angle of twist, or how much a specific section rotates from its original equilibrium position.
Engineers must understand these forces to prevent machines from breaking. The internal resistance to this twisting is called torsional shear stress. This stress is measured in pascals (Pa) or pounds per square inch (psi). The torque itself is measured in newton metres (N·m) or foot-pound force (ft·lbf).
The way an object twists depends heavily on its shape and material. In circular rods or tubes with constant wall thickness, the torsion constant is equal to the polar moment of inertia. However, for other shapes, this constant can be much lower. If a cross-section is not circular, the twisting often causes a distortion known as warping. Warping occurs when the transverse sections of the object do not remain flat or plane.
To calculate these complex effects accurately, engineers often use finite element analysis (FEA). Other methods include the membrane analogy or shear flow approximation. The physical properties of the object are often expressed through torsional rigidity, which is the product of the torsion constant, the length, and the shear modulus. The shear modulus, also called the modulus of rigidity, is usually measured in gigapascals (GPa).
Understanding where stress occurs is vital for safety. The highest shear stress always happens on the outer surface of a shaft. This is because the radius is at its maximum at the surface. High stresses can be made even worse by stress concentrations, such as rough spots on the material. To increase the service life of a part, engineers often polish shafts to a fine surface finish. This reduces the maximum stress and helps prevent early failure.
The amount of twist can be calculated by looking at the torque, the length of the object, the shear modulus, and the torsion constant.
When a shaft is loaded only by torsion, the stresses can be broken down into principal stresses. Using a method called Mohr's circle, we can see that one principal stress will be in tension and the other will be in compression. These stresses sit at a 45-degree helical angle around the shaft. This leads to specific ways that materials fail. If a shaft is made of a brittle material, a crack will start at the surface and move toward the core. This crack travels in a 45-degree helical shape, much like twisting a piece of blackboard chalk.
For thin, hollow shafts, excessive load can cause a different failure called twisting buckling. This results in wrinkles forming at a 45-degree angle to the shaft axis.
Engineers use these mathematical principles to design massive industrial components. For example, consider the shaft of a modern steam turbine in a nuclear power plant.
These shafts may carry 1000 MW of power. In Europe, the electricity frequency is 50 Hz, while in North America, it is 60 Hz. This frequency helps determine the angular frequency of the rotation. For a large plant, the torque might reach 3.1831 million N·m. If the steel has a yield stress of 250 million N/m2, engineers must apply a factor of safety. By using a safety factor of 5, a shaft that might only need a 40 cm diameter could actually require a diameter of 69 cm to remain safe.
Specialized tools like the torsional resonator allow scientists to study the deeper properties of materials. A torsional resonator is an analytical system used to study the elastic or viscoelastic behavior of fibers. The setup typically involves a fiber fixed at one end and a rigid rod attached to the other. As the rod rotates, it introduces torsional deformation to the fiber. The fiber acts like a spring, and its motion can be described by its torsional stiffness and the moment of inertia of the system. This allows researchers to see how much energy a material dissipates during motion.
Most research focuses on viscoelastic materials, which show both elastic and viscous behaviors. An elastic material is one that restores its original shape after deformation because its energy is conserved. However, a viscous material loses some of its energy through dissipation and does not return to its original shape. Scientists use complex terms, like the complex modulus, to account for both of these behaviors. The real part describes the elastic behavior, while the imaginary term describes the viscous damping.
This helps researchers understand how energy moves through different substances.
This method of study has important applications in biology. For instance, researchers Valtorta and Mazza used a torsional resonator to study the properties of soft tissue. By observing how a fiber responds to biological materials, they could characterize the complex shear modulus of the tissue. This allows scientists to assess how much energy is dissipated within living things. Understanding these mechanics helps connect the physics of twisting to the fundamental way biological systems function under stress.
Where will your curiosity go next?
🖼️ Images & Media (3)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.