Some things glow when hit.
Tiny bits hit them. Then they shine with light. This helps us see small things. It is like magic!
Can you see the light?
Some special materials glow when they are hit.
Tiny bits of energy strike the material. This makes the material shine with light.
This light is very useful. We can use tools to catch the light. The tools turn the light into a signal. This signal tells us about the tiny bits. Doctors use these tools to see inside the body. They also help us find oil deep in the ground.
It is a clever way to see the unseen.
A scintillator is a special material. It glows when tiny bits of radiation hit it. This glow is called scintillation.
When radiation strikes the material, it gives up its power. The material absorbs this power. Then, it lets out light.
Sometimes the light comes out right away. Other times, the light is delayed. This can take a tiny fraction of a second or even hours.
To use this light, we need a sensor. We often use a photomultiplier tube, or PMT. This is a tool that catches the light. The PMT turns the light into a pulse of electricity. This pulse tells us about the particle that hit the material.
People use these tools in many ways. Doctors use them in CT scanners to see inside bodies. They also help find oil deep in the earth. Some tools even help keep us safe from radiation.
Scientists like to use materials that are very dense. A high density helps the material stop the radiation. This makes the tool work better.
A scintillator is a special material that glows when it is hit by radiation. This glowing is called scintillation, or radioluminescence. When a tiny particle strikes the material, the material absorbs the particle's energy. It then releases that energy as a flash of light.
Sometimes this light happens instantly. Other times, the material stays in an excited state for a while. This delay can last from a few nanoseconds to many hours. This slow release of light is called phosphorescence.
To use this light, scientists connect the scintillator to an electronic sensor. A common sensor is called a photomultiplier tube, or PMT. The PMT catches the light emitted by the scintillator. It uses the photoelectric effect to turn that light into electrons. These electrons are then multiplied to create a tiny pulse of electricity.
This electrical pulse can be studied to learn about the original particle. Other sensors include photodiodes or silicon photomultipliers. These tools help turn a tiny flash of light into useful data.
People have been studying these flashes for a long time. In 1903, Sir William Crookes built the first device using a ZnS screen. He called this device a spinthariscope. It was very hard to use because you had to look through a microscope in a dark room. In 1944, researchers named Curran and Baker changed everything. They used the new PMT to measure the light instead of the human eye. This discovery marked the birth of the modern scintillation detector.
There are many ways to use these detectors today. In medicine, they are used in CT scanners and gamma cameras. The American government uses them for Homeland Security radiation detectors.
They are also used in the petroleum industry to find oil. Scientists use them in particle physics to find rare events. Some scintillators are even used in fluorescent tubes to turn UV light into visible light.
Not all scintillators are made the same way. Some are organic crystals, like anthracene or stilbene. These are very durable but can be hard to make in large sizes. Others are organic liquids mixed with special chemicals. When choosing a material, scientists look for a high density. A high density helps the material stop the radiation more easily. They also look for a fast response time to measure things accurately.
A scintillator is a specialized material that exhibits scintillation, also known as radioluminescence. This process occurs when the material is excited by ionizing radiation. When an incoming particle strikes the scintillator, the material absorbs the particle's energy. It then re-emits that absorbed energy in the form of light.
In some materials, the excited state is metastable. This means the relaxation back to lower energy states is delayed. This delay can last from a few nanoseconds to several hours. Depending on the type of transition and the wavelength of the emitted photon, this phenomenon is classified as either delayed fluorescence or phosphorescence.
To turn these flashes of light into data, scientists use a scintillation detector. This device couples the scintillator to an electronic light sensor. A common sensor is the photomultiplier tube, or PMT. The PMT absorbs the light from the scintillator and re-emits it as electrons via the photoelectric effect. These photo-electrons undergo multiplication to create an electrical pulse. This pulse can be analyzed to reveal information about the original particle.
Other sensors include vacuum photodiodes, which do not amplify the signal, or silicon photodiodes. Silicon photomultipliers use an array of reverse-biased photodiodes operating in avalanche mode. This allows each pixel to be sensitive to even a single photon.
Scintillators are categorized by their chemical makeup. Organic scintillators are aromatic hydrocarbon compounds containing benzene ring structures. Common examples include anthracene, stilbene, and naphthalene. Anthracene is often used as a reference because it has the highest light output of all organic scintillators. These organic crystals are durable, but they are difficult to machine or grow in large sizes. Another type is organic liquids. These consist of organic scintillators, called solutes, dissolved in an organic solvent. Solutes like p-terphenyl or PPO are mixed with solvents like toluene or benzene to create these liquid solutions.
The history of this technology began in 1903. Sir William Crookes built the first device using a ZnS screen. He called this instrument a spinthariscope. To use it, a person had to view the scintillations through a microscope in a darkened room. This method was very tedious for researchers. The field changed significantly in 1944. Researchers Curran and Baker replaced the human eye with the newly developed PMT. This transition from visual observation to electronic measurement marked the birth of the modern scintillation detector.
When selecting a material, scientists must balance many different properties. High density is a major requirement. High density reduces the size of particle showers and decreases the range of Compton scattered photons. This leads to better spatial resolution. Materials with heavy ions, like lead or cadmium, increase the photoelectric effect. High stopping power is also necessary for compact detectors. Scientists also look for fast operation speeds. Precision in timing is proportional to the inverse of the decay time. Short decay times are essential for fast coincidence circuits and high event rates.
Scintillators have a wide range of practical applications. In medicine, they are used in CT scanners and gamma cameras for diagnostics. The American government utilizes them for Homeland Security radiation detectors. They are also used in the petroleum industry for Gamma Ray logs during oil exploration. In particle physics, they help detect rare events. Even everyday technology uses them, such as in older CRT computer monitors and television sets. Some researchers even propose using them in nuclear batteries to harness gamma-ray energy.
Efficiency and light output are critical for a detector's performance. Light output is often measured as the number of photons produced per keV of deposited energy. For example, plastic scintillators produce about 10 photons/keV. Bismuth germanate produces about 8 photons/keV. Anthracene produces approximately 40 photons/keV. However, quenching can reduce this efficiency. Quenching occurs when radiationless deexcitation processes turn the excitation into heat instead of light. Additionally, the overall signal depends on the quantum efficiency of the PMT, which is typically around 30% at its peak. Scientists must also consider how temperature affects the material, especially in high-temperature environments like oil drilling.
Where will your curiosity go next?
🖼️ Images & Media (4)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.