Some things change shape.
You can bend metal. It stays in the new shape. This helps us make tools. It helps us make things. Can you bend a spoon?
Some things change shape forever.
This is called being plastic. If you bend a metal bar, it stays bent. It does not snap back.
This happens because the tiny parts inside move. In metals, these tiny parts slide past each other. Other things like rocks can change shape too. They do this by making tiny cracks. Even soft foam can change shape. The little bubbles inside just move around. This helps us make many useful things.
Some materials change shape forever when we push or pull them.
This way of changing is called plasticity. It is different from being elastic. When something is elastic, it snaps back to its old shape. But plastic materials stay in their new shape.
How this happens depends on the material. In metals, tiny parts called dislocations move. These parts let layers of atoms slide past each other. This is called slip. Most metals are easier to shape when they are hot. For example, lead is very easy to shape at room temperature.
Other things work differently. Rocks and concrete change shape by making tiny cracks. In foams, the little bubbles or cells move around to new spots. Even soil can be plastic. In clay, the tiny grains move into new groups.
In some materials, like plastic, pulling them can make them look hazy. This is called crazing. It happens because the material has tiny empty spaces. When you pull it, those spaces open up. This makes the material look different.
Have you ever bent a metal wire and noticed it stayed in its new shape?
This ability is called plasticity. It is a special way that solid materials change shape forever. When we apply force to a material, it might act in an elastic way first. Elastic means the object snaps back to its original size when you let go. But if you push hard enough, the material reaches a point called the yield strength. Once it passes this threshold, it enters the plastic stage. Now, the change is permanent and cannot be reversed.
How this works depends on what the material is made of. In metals, the change happens at a tiny scale called the crystal lattice. Most metals have small defects called dislocations. These dislocations allow layers of atoms to slide past each other in a process called slip. Another way metals change shape is through twinning, where deformation happens along two specific planes.
For other materials, the way it works is quite different. Brittle things like rock, concrete, or bone change shape because of tiny cracks called microcracks. In cellular materials like foams, the bubbles or cells simply rearrange themselves into new spots.
Scientists study these changes to understand how to shape the world around us. For example, many metals are easier to shape when they are very hot. This is because heating them makes them more plastic. Lead is so plastic that it can be shaped even at room temperature. On the other hand, cast iron is not plastic enough to be forged even when it is hot.
Engineers use these rules to know exactly how much force to use when making tools or building structures. Knowing when a material will yield helps keep things safe.
There are many specific facts about how these forces work. In single crystals, the transition to plastic flow is defined by a value called the critical resolved shear stress. This value can change based on the temperature. There are three different temperature regions that affect how much stress is needed to move dislocations.
In the high temperature region, which is when the temperature is 0.7 times the melting temperature or higher, special movements called Nabarro–Herring and Coble flow can happen. Even soil shows plasticity, which depends on its water content and the way its tiny grains move.
You can see these ideas in many everyday things. Think about the foam in a cushion or the clay used for pottery. Even the plastic in a container follows these rules. In some materials like polymers, pulling them can cause something called crazing. This creates a hazy or "crazy" pattern of stretch marks because tiny empty spaces open up.
Whether it is a metal spoon or a piece of concrete, plasticity is always at work. It is the reason we can shape the world into the things we use every day.
In physics and materials science, plasticity refers to a solid material's ability to undergo permanent deformation. This is a non-reversible change in shape that occurs when applied forces are strong enough. Unlike elastic behavior, where an object returns to its original form after a load is removed, plastic deformation leaves a lasting change. This phenomenon is essential for engineering and manufacturing. It allows us to shape metals, ceramics, and other solids into useful tools and structures.
To understand how this happens, we must look at the transition from elastic to plastic behavior. This transition is known as yielding. When a material is under a load, it first behaves elastically. In this stage, each increase in load causes a proportional increase in extension. If you remove the load, the piece returns to its original size. However, once the load exceeds a specific threshold called the yield strength, the material enters the plastic region. In this region, extension increases more rapidly than in the elastic region. Even after the load is removed, a degree of extension remains.
The physical mechanisms driving plasticity vary depending on the material's structure. In crystalline metals, plasticity is often a result of dislocations. These are defects within the crystal lattice. Plasticity in these metals occurs through two primary modes: slip and twinning. Slip is a shear deformation where atoms move across many interatomic distances. Twinning involves deformation occurring along two specific planes due to applied forces.
Other materials use different processes. Brittle materials like rock, concrete, or bone rely on slip at microcracks. Cellular materials, such as liquid foams or biological tissues, change shape through the rearrangement of bubbles or cells, often via T1 processes.
Temperature and speed also play critical roles in how materials deform. Most metals become more plastic when they are heated. For example, lead is plastic enough to be shaped at room temperature. In contrast, cast iron lacks sufficient plasticity for forging, even when it is hot. Some materials exhibit visco-plastic behavior, meaning their deformation depends on the speed of the applied force. Higher stresses are often required to increase the rate of deformation. Additionally, some materials undergo work hardening. This means that after being shaped by processes like cold forming, they require increasingly higher stresses to deform further.
In single crystals, the transition to plastic flow is defined by the critical resolved shear stress, or $\tau_{CRSS}$. This value determines when dislocation migration begins along slip planes. This stress is influenced by temperature through three distinct regions. In the low-temperature region, where temperature is less than or equal to 0.25 times the melting temperature ($T_m$), high strain rates are needed to initiate flow. In the moderate region, between $0.25T_m$ and $0.7T_m$, thermal shear stress components change. In the high-temperature region, where $T \ge 0.7T_m$, plastic flow occurs through mechanisms like Nabarro–Herring and Coble diffusional flow.
Plasticity can also be observed in non-crystalline or amorphous materials, such as polymers. These materials lack long-range order and contain significant free volume, or wasted space. When these materials are pulled under tension, these spaces can open up. This leads to a phenomenon called crazing. Crazing creates fibrils within the material and can result in a hazy appearance or a "crazy" pattern of stretch marks.
Similarly, cellular materials like foams deform when the bending moment exceeds the fully plastic moment. In open-cell foams, this happens to the cell walls. In closed-cell foams, the presence of a membrane spanning the cell faces can increase yield strength under tension.
Beyond metals and polymers, even soils and rocks demonstrate plastic properties. In soils, particularly clays, plasticity is caused by the rearrangement of clusters of adjacent grains. This behavior is highly dependent on water content and chemical composition. In rocks and concrete, inelastic deformation is driven by the formation of microcracks and sliding motions. At very high pressures and temperatures, the motion of dislocations within individual grains can also influence how these materials behave. Understanding these complex connections helps scientists predict how the Earth and man-made structures will respond to immense forces.
Where will your curiosity go next?
🖼️ Images & Media (6)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.