Some things can hold a magnet's pull.
This is how well they do it. Some things push a magnet away. Other things pull a magnet close. It helps us make tools. Can you find a magnet?
Some things can hold a magnet's pull.
This is called permeability. It shows how much a material reacts to a magnet.
Some things pull a magnet close. These are called paramagnetic. They are attracted to the pull.
Other things push a magnet away. These are called diamagnetic. They act like a tiny shield.
Some strong things are called ferromagnets. You can see them on your fridge. They have a very strong pull.
Even empty space has a special pull. We call this the magnetic constant. It is a rule for the world.
How do materials react to magnets? Scientists use a word called permeability. It measures how much a material becomes magnetic. This happens when a magnetic field is nearby.
There are different ways things react. Some materials are called diamagnetic. These materials push a magnet away. They have a low permeability. Other materials are paramagnetic. These are pulled toward a magnet. They have a higher permeability.
Some materials are very strong. We call these ferromagnets. You might see them on a fridge. They have a very big pull.
Even empty space has a value. We call this the permeability of free space. It is a constant number. It helps us understand how magnets work in a vacuum.
Scientists also look at magnetic susceptibility. This is a way to show how much a material reacts. It is a ratio that tells us how much magnetization happens. Some materials change based on the field strength. For example, electrical steel can have a very high permeability. This value can change as the magnetic field gets stronger.
Permeability is a way to measure how a material reacts to a magnetic field. It shows how much magnetization happens inside a substance when a magnet is nearby. Scientists use the Greek letter μ to represent this idea.
This measurement is very important for understanding electromagnetism. It helps us see how different materials respond to magnetic forces. Without knowing permeability, we could not design many modern tools.
To understand how it works, we look at two different magnetic fields. The first is the magnetizing field, called H. This field is created by electric currents or the poles of a magnet. The second is the magnetic flux density, called B. This is the field that actually acts on electrical charges. In many materials, these two fields have a simple relationship. They are proportional to each other through the permeability factor. This means if you change one, the other changes in a predictable way.
People have been studying these magnetic ideas for a long time. A scientist named William Thomson, also known as Lord Kelvin, coined the term in 1872. He wrote about it in a paper about magnetic permeability and heat. Later, in 1885, Oliver Heaviside began using the term alongside permittivity. These thinkers helped us build the rules of electromagnetism we use today. Their work turned simple observations into a precise science.
There are many specific numbers and values for different materials. The permeability of a vacuum is a special constant called μ0. This value is 4 × 10⁻⁷ H/m. Other materials have much higher values. For example, electrical steel can have a relative permeability of 2,000 or even 38,000. Some materials like nickel have a relative permeability of 100 to 600. Even wood and air have their own specific ways of reacting to magnets.
You can see these ideas in things you see every day. Ferromagnets are the strong materials that hold notes on your refrigerator. Paramagnetic materials are attracted to magnets, but the pull is very weak. Diamagnetic materials actually push away from a magnetic field. Superconductors are a special case because they show a very strong diamagnetic effect. Understanding these different reactions helps scientists build everything from sensors to powerful magnets.
Permeability is a fundamental concept in electromagnetism. It measures how much magnetization a material produces when it is placed in a magnetic field. Scientists use the Greek letter μ (mu) to represent this property. In many materials, permeability describes the relationship between two different magnetic fields. One field is the magnetizing field, known as H. This field is generated by electric currents or the poles of a magnet. The other field is the magnetic flux density, known as B. This field is what actually acts on electrical charges. Permeability is the ratio between these two values. It tells us how easily a substance allows a magnetic field to pass through it or build up within it.
To understand the mechanism, we must look at how H and B interact. The magnetizing field H is measured in amperes per meter. The magnetic flux density B is measured in volt-seconds per square meter, which is equivalent to one tesla. In a simple, linear material, these two fields are precisely proportional. This means if you increase the strength of H, the strength of B increases by a predictable amount. The factor that connects them is the permeability, μ. In a vacuum, this relationship is defined by a constant called the permeability of free space, or μ0. This constant is exactly 4 × 10⁻⁷ H/m. In a vacuum, there is no material to interfere, so the relationship is perfectly direct.
Materials can be categorized by how they respond to these fields. One way to describe this is through magnetic susceptibility, denoted by the symbol χm. This is a dimensionless number that shows the degree of magnetization. We can also use relative permeability, which compares a material to a vacuum. Relative permeability is the ratio of a material's permeability to μ0. If the relative permeability is greater than one, the material is attracted to magnetic fields. If it is less than one, the material reacts differently. These different responses lead to three main types of magnetic behavior: paramagnetism, diamagnetism, and ferromagnetism.
Paramagnetism occurs in materials that are weakly attracted to an external magnetic field. These materials have a relative permeability greater than one. The magnetic moment induced in them is linear, meaning it changes steadily with the field strength. However, this effect is quite weak and often requires sensitive tools to detect. Unlike stronger magnets, paramagnetic materials do not stay magnetized once the external field is removed. This happens because thermal motion causes the internal spins to become randomly oriented. Diamagnetism is the opposite effect. Diamagnetic materials create a magnetic field that opposes the external field. This causes a repulsive effect. These materials have a relative permeability of less than one. While this is usually a weak effect, superconductors show a very strong diamagnetic response.
History shows how these concepts were built over time. William Thomson, also known as Lord Kelvin, coined the term "permeability" in 1872. He introduced it in his work regarding magnetic permeability and other physical motions. Later, in 1885, Oliver Heaviside began using permeability alongside the concept of permittivity. These developments allowed scientists to create the mathematical rules for electromagnetism. Today, we use these principles to understand everything from microscopic electron orbits to massive industrial magnets. The study of how fields move through matter has become essential to modern physics.
Specific values for permeability vary wildly depending on the substance. For example, the relative permeability of electrical steel can range from 2,000 to as high as 38,000. This depends on the strength of the magnetic field and the specific composition of the steel. Other materials, like nickel, have a relative permeability between 100 and 600. Some substances show almost no response at all. For instance, the relative permeability of wood or air is very close to one. Even more extreme are superconductors, which have a relative permeability of -1. These numbers show that permeability is not just one single value for all matter, but a unique fingerprint for every material.
In complex cases, the math becomes more advanced. In strong magnetic materials like iron, the relationship between H and B is not always simple. These materials often show nonlinear behavior or magnetic hysteresis. This means the state of the material depends on its previous history of magnetization. For high-frequency applications, scientists use "complex permeability." At high frequencies, the magnetic fields might react with a slight time delay or lag. This lag is represented by a phase delay in the math. By studying these complex values, engineers can design better components for microwave technology and high-speed electronics.
Where will your curiosity go next?
🖼️ Images & Media (1)
More to explore
✨ What else?
Related topics you might enjoy
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.