Sometimes, machines make extra sounds.
These sounds can mess up a signal. It can come from the sun or even rain. This can make it hard to hear things. It is a bit like a fuzzy radio. Do you hear extra noise too?
Sometimes, machines make extra sounds.
This is called noise. It can mess up a signal. Noise can come from the sun. It can even come from stars.
Some noise comes from lightning in a storm. It can come from cars or planes too. This extra energy makes it hard to hear things. It is a bit like a fuzzy radio. We can use special wires to help. These wires can keep the noise out. We want to keep the signal clear.
In electronics, noise is an unwanted disturbance. It messes up a useful signal. Noise can come from many places. Some noise is made inside a device.
Thermal noise is one kind. It happens because of heat. Tiny parts called electrons move around. This movement is random. This creates noise in any conductor. You can reduce this by cooling things down.
Another kind is shot noise. This happens when electrons cross a gap. It is like rain hitting a tin roof. The rain falls in separate drops. The electrons arrive at different times too.
Noise can also come from outside. Lightning in a storm makes atmospheric noise. The sun can make solar noise. Even distant stars make cosmic noise.
People use many ways to stop noise. A Faraday cage is a metal box. It keeps outside noise away from a circuit. You can also use shielded cables. These act like a cage for wires. Engineers want a high signal-to-noise ratio. This means the signal is much stronger than the noise.
In the world of electronics, noise is an unwanted disturbance. It acts like a messy scribble over a clear drawing. This disturbance happens to an electrical signal. It can come from inside a device or from the world around it. Scientists and engineers often want to keep signals very clean. They use special measures to see how much noise is present. One common measure is the signal-to-noise ratio, or SNR. This helps people understand if the useful signal is much stronger than the noise.
Noise happens in many different ways. One type is called thermal noise, which is also known as Johnson–Nyquist noise. This happens because of the random heat motion of electrons inside a conductor. This movement occurs even if there is no voltage applied. Another type is called shot noise. This occurs when electrons flow across a gap or a barrier. It is similar to the sound of rain falling on a tin roof. While the rain might seem constant, the drops actually arrive at separate times.
Different parts of a circuit create different kinds of noise. For example, transistors can create partition noise when current divides between paths. Some noise, called flicker noise, has a pink spectrum. This means the noise level falls off as the frequency gets higher. There is also burst noise, which people sometimes call popcorn noise. This is because it can make popping or crackling sounds in audio circuits. These shifts in voltage happen at random and unpredictable times.
Noise can also come from big things in space or nature. Atmospheric noise is caused by lightning during thunderstorms. Solar noise comes from the Sun. Solar storms can cause many electrical disturbances. Even distant stars create cosmic noise. This noise is strongest between 20 and 120 MHz. Other noise comes from man-made things. Cars, planes, and high voltage wires all create industrial noise.
Engineers use many tools to fight unwanted noise. A Faraday cage is a metal enclosure that can block external noise. Shielded cables act like a cage for wires to protect them. Engineers also use twisted pair wiring to reduce electromagnetic noise. This works by making small loops that cancel out the noise current. Sometimes, engineers actually add noise on purpose. This is called dither. It can help people see signals that are normally too small to detect.
In the field of electronics, noise refers to an unwanted disturbance within an electrical signal. It acts as a random, unpredictable disruption to the useful information being transmitted. Noise is not just a technical nuisance; it is an inherent part of physics. It is central to the study of thermodynamics. Any conductor that possesses electrical resistance will naturally generate thermal noise. To completely eliminate thermal noise, a device would need to be cooled cryogenically. Even under those extreme conditions, quantum noise would still remain present.
Noise is often categorized by its specific mechanism of origin. Thermal noise, or Johnson–Nyquist noise, is one of the most fundamental types. It is caused by the random thermal motion of charge carriers, such as electrons, inside a conductor. This movement happens regardless of whether a voltage is applied to the material. Thermal noise is described as being approximately white. This means its power spectral density is nearly equal across the entire frequency spectrum. In communication systems, this is often modeled as additive white Gaussian noise (AWGN).
Another distinct type is shot noise, which arises from the discrete nature of electricity. Shot noise occurs when charge carriers, like electrons, traverse a gap or a potential barrier. Because electrons arrive at discrete, random intervals, the current exhibits statistical fluctuations. An analogy for this is the sound of rain hitting a tin roof. While the rain may seem like a steady stream, the individual drops arrive one by one. In vacuum tubes, shot noise occurs as electrons randomly leave the cathode to reach the anode. This effect is also seen in certain mesoscopic resistors where the element is extremely short.
Electronic components also produce specialized forms of noise based on their internal structure. Partition noise occurs when an electric current divides between two or more different paths. For instance, a transistor typically produces more noise than the combined shot noise of its two PN junctions. Flicker noise, also known as 1/f noise, is a process where the frequency spectrum falls off steadily as frequencies increase. This results in what is called a pink spectrum. There is also burst noise, frequently called popcorn noise in audio circuits. This noise consists of sudden, unpredictable jumps between voltage or current levels that can last from milliseconds to seconds.
Beyond the internal components, noise can be introduced by the external environment. This is often referred to as coupled noise. It can enter a circuit through inductive coupling, capacitive coupling, or even through a radio antenna. Atmospheric noise, or static, is caused by natural events like lightning discharges during thunderstorms. Industrial noise comes from man-made sources like automobiles, aircraft, and high-voltage power lines. Even space provides significant noise sources. Solar noise originates from the Sun, and solar storms can increase electrical disturbances. Cosmic noise is generated by distant stars. This cosmic noise is the strongest component in the 20 to 120 MHz frequency range.
Engineers use several precise methods to mitigate or reduce these unwanted disturbances. A Faraday cage is a metal enclosure used to isolate a circuit from external electromagnetic noise. For wiring, engineers often use shielded cables, which act like a Faraday cage for the wire itself. Another technique is using twisted pair wiring. By twisting two wires together, the magnetic fields induce currents in opposite directions in alternate loops, which cancels out the net noise current. If a specific frequency is causing trouble, such as the 50 or 60 Hz from power lines, a notch filter can be used to reject that specific band. For extremely high-accuracy applications like radio telescopes, thermal noise is reduced by cooling the circuits.
While noise is usually a problem, it can occasionally be used for a beneficial purpose. One such application is dither. Dither is the intentional introduction of additional noise into a signal. This technique can be used to reduce quantization error, which is a type of noise in digital systems. By adding dither, it becomes possible to retrieve signals that are actually below the normal detection threshold of an instrument. This phenomenon is known as stochastic resonance. In these specific cases, the presence of noise actually helps reveal the underlying information more clearly.
Where will your curiosity go next?
🖼️ Images & Media (1)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.