A big bridge goes over the sea.
It helps cars cross the water. It was built a long time ago. It is very strong and tall. We use it to travel. Do you like big bridges?
A big bridge crosses a stretch of water.
It connects an island to the mainland. Before the bridge, people used boats. The water was very fast and dangerous.
A man named Thomas Telford built the bridge. He used huge iron chains to hold it up. This helped people travel much faster. It was one of the first big bridges like this. People still use it to drive today.
It is a very famous place to see.
The Menai Suspension Bridge crosses the Menai Strait. This water separates the island of Anglesey from Wales.
Long ago, crossing this water was very hard. The tides create strong currents and whirlpools. Boats were often in danger. Even cattle had to swim across the water. This was not safe for the animals.
Thomas Telford designed the bridge. He finished it in 1826. It was one of the first big suspension bridges. A suspension bridge uses long cables to hold up the road.
Telford used sixteen huge iron chains. Each chain had 935 links. Workers built the chains on site. They used a cradle to lift the links up the towers.
The bridge made travel much faster. A trip from London to Holyhead saved nine hours. Today, the bridge is still very important. It is a Grade I listed structure. This means it is a building of special history.
The Menai Suspension Bridge is a famous structure in Wales. It spans the Menai Strait to connect the mainland to the island of Anglesey.
For a long time, getting to the island was very hard. The water has strong tides that create fast currents and whirlpools. In 1785, a boat carrying 55 people sank during a storm. Only one person survived that scary event. People even had to make cattle swim across the water to reach markets. This was a dangerous way to move valuable animals.
This bridge works using a special design called a suspension bridge. It uses long cables to hold up the road above the water.
The bridge has two tall towers made of Penmon limestone. These towers are hollow with walls inside for strength. Sixteen huge iron chains hold the weight of the span. Each chain is made of five parallel bars of wrought iron. These bars are connected by many small links. The chains sit on cast iron saddles that can move with temperature changes.
Thomas Telford was the engineer who designed this amazing bridge. He was tasked with building a road from London to Holyhead. This route was important because Holyhead is a main port for ferries to Ireland. Construction began in 1819 after Parliament gave permission. Workers had to do a very hard job to build it. They assembled the heavy chains link by link on platforms. To get the chains up, they used a cradle to lift men and metal.
Building the bridge required many specific parts and people. William Hazledine supplied the iron needed for the project. Each of the sixteen chains had 935 links in it. There were 80 iron bars in every single chain. To move the middle part of the chain, 150 men used pulleys and a raft. The bridge finally opened on 30 January 1826. It made travel much faster for everyone. A trip from London to Holyhead became nine hours shorter.
Many things have changed for the bridge since it first opened. In 1938, the old iron chains were replaced with steel ones. This helped because the bridge had a 4-ton weight limit that was hard to follow. The bridge is a Grade I listed structure, which means it is very special.
You can even see the bridge on a British one-pound coin. It remains a vital path for people traveling through Wales today.
The Menai Suspension Bridge is a major engineering landmark in Wales. It spans the Menai Strait, which separates the island of Anglesey from the Welsh mainland.
This bridge is a Grade I listed structure, meaning it is of special historical importance. It was one of the first major suspension bridges in the world. It was also only the second major suspension bridge designed to carry vehicles. The first was the Union Chain Bridge, completed in 1820. The Menai Bridge remains a vital link for travelers today.
The geography of the Menai Strait made a bridge necessary. The strait was formed by glacial erosion during the Pleistocene epoch. This period of glaciation lasted from about 2,580,000 to 11,700 years ago. Moving ice sheets scoured the bedrock to create deep channels. As the ice receded, the sea flooded these hollows to form the strait. The water there is very dangerous due to strong tidal flows. Twice daily tides create four strong flows that cause whirlpools and currents.
Before the bridge, crossing the strait was a high-risk task. In 1785, a boat with 55 people sank during a gale. Only one person survived that disaster. Moving cattle was also difficult and expensive. Farmers often drove cattle into the water to swim to the mainland. This caused many valuable animals to be lost. The need for a reliable route grew after 1800. When Ireland joined Great Britain, more people traveled between London and Holyhead. Holyhead was the main port for ferries to Dublin.
Civil engineer Thomas Telford designed the bridge to solve these problems. He was tasked with building the Holyhead Road. He chose a site near Bangor on the mainland and Porthaethwy on Anglesey. This location had tall banks that allowed sailing ships to pass underneath. Telford proposed a suspension design to cross the fast waters with a wide span. Parliament authorized the project through the Roads Between London and Holyhead Act 1819. Construction began in 1819 with the building of the towers.
The bridge mechanism relies on massive iron chains to support the roadway. The two towers are made of Penmon limestone. These towers are hollow and contain internal cross-walls for strength. Sixteen huge chain cables support the entire span. Each cable consists of five parallel bars of wrought iron links. This means there are 80 iron bars and 935 links per cable. The chains rest on cast iron saddles with rollers. These rollers allow the chains to move when temperatures change.
Building these chains was a massive undertaking. William Hazledine supplied the required wrought and cast iron. To prevent rust, the iron was soaked in linseed oil and painted. Workers assembled most of the chains link by link on site. They used platforms near tunnel mouths and scaffolding to reach the tower tops. For the final central section, workers used a raft and a pulley system. It took 150 men to lift the chains into place. The bridge opened on 30 January 1826. It reduced the London to Holyhead journey by 9 hours.
The bridge has undergone many changes to stay safe and useful. The original roadway was unstable in the wind because it lacked stiffening trusses. W. A. Provis strengthened the deck in 1840. In 1893, Sir Benjamin Baker designed a new steel deck to replace the wood. The original 4-ton weight limit became a problem for freight. In 1938, the wrought iron chains were replaced with steel ones. This was done without closing the bridge.
Modern maintenance continues to be a challenge for the structure. In 1999, the bridge closed for a month for resurfacing. During World War II, a Wellington bomber was even flown under the bridge as a bet. More recently, the bridge has faced several closures. In 2022, it closed for essential maintenance following engineering advice. It reopened in early 2023 with a 7.5-ton weight limit. In October 2025, it closed again due to weight limit policing issues. The bridge remains a candidate for a World Heritage Site.
Where will your curiosity go next?
🖼️ Images & Media (5)
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.