Tiny bits hold things together. These bits make all solid things. Some bits stay very strong. Some bits can bend easily. This helps make tools for you. Can you find something hard?
Everything solid is made of tiny bits. These bits stay together in different ways. Some bits share parts to stay strong. This makes a diamond. A diamond is very hard.
Other bits use pull to stay close. This is how table salt works. Salt can break easily if you hit it.
Some bits have parts that move around. This happens in metals like copper. Metals can bend without breaking.
Some solids are made of small groups. These are often soft. Wax is one example.
Some things are a mix of these ways. This makes them special. The world is full of different solids.
Everything solid is made of tiny parts. These parts stay together in different ways. We call these ways bonds. Bonds decide how a solid acts.
One way is covalent bonding. This happens when atoms share parts called electrons. A diamond is a network covalent solid. It uses a big network of these bonds. This makes it very strong and hard. It also has a high melting point. But diamonds are brittle. This means they can break easily.
Another way is ionic bonding. This happens when atoms use pull to stay close. They use opposite charges to stick together. Table salt is an ionic solid. These solids are often brittle too.
Metals use metallic bonding. In metals, electrons move around freely. This is called a delocalized sea of electrons. Metals like copper can bend without breaking. This is called being ductile. Some metals melt at low heat. Mercury is one. Other metals like tungsten melt at very high heat.
Some solids are a mix. They do not fit into just one group. These are called intermediate solids. They can have parts of two different ways.
Everything around us that is solid stays together because of tiny bonds. These bonds act like the glue holding atoms or molecules in place. Scientists group solids into four main types based on how they bond. These groups are network covalent, ionic, metallic, and molecular solids. Each type has its own special way of acting. They might be very hard, or they might bend easily. The way electrons move between atoms changes everything about the material.
Network covalent solids work like one giant, connected molecule. Atoms stay together by sharing pairs of electrons. This sharing is called covalent bonding. Because these bonds are so strong, these solids have high melting points. They are also very stiff and strong. However, they are often brittle, which means they can break instead of bending. A famous example is a diamond. Other examples include quartz and graphite.
Ionic solids use a different kind of pull to stay together. This happens through electrostatic attraction between opposite charges. One atom gives an electron to another atom to create these charges. This process forms ionic bonds. Table salt, or sodium chloride, is a classic ionic solid. These materials are usually quite brittle. Their melting points are often moderately high. They also have very low vapour pressures.
Metallic solids are unique because of how their electrons move. They have a high density of shared electrons that are delocalized. This means the electrons move around freely like a sea. This movement lets atoms slide past each other without breaking the bond. Because of this, metals are often ductile, meaning they can be shaped. Copper and aluminum are common metallic solids. Melting points for metals vary a lot. Mercury melts at a very low 234 K. Tungsten has a very high melting point of 3695 K.
Not every solid fits into just one perfect box. Some materials are intermediate forms that mix different types of bonding. For example, some bonds are partly covalent and partly ionic. This is called a continuum. A material like quartz has bonds that are mostly covalent but also polar. Other materials, like carbon nanotubes, can show both covalent and metallic traits. Even plastics like polyethylene can act like strong fibers. These mixtures show how many different ways atoms can connect.
Solids are defined by how their internal components stay together. Scientists classify these materials based on the specific nature of their atomic or molecular bonds. This classification helps us understand why some materials are hard while others are soft. It also explains why some conduct electricity and others do not. There are four traditional categories of solids. These are network covalent solids, ionic solids, metallic solids, and molecular solids. However, many materials do not fit perfectly into one category. They often exist as intermediate forms that mix different bonding styles.
Network covalent solids are held together by covalent bonds. A covalent bond occurs when atoms share pairs of electrons. This sharing happens between atoms that have similar electronegativity, which is a measure of how strongly an atom pulls on electrons. Because these bonds form a continuous web, a network covalent solid can be viewed as one single, massive molecule. Diamond is the most famous example of this type of solid. Other examples include silicon, quartz, and graphite. These materials possess high strength and high melting points. They also have a high elastic modulus, meaning they are very stiff. However, they are often brittle. This brittleness happens because the directional nature of covalent bonds resists the shearing motions required for plastic flow. When enough force is applied, the bonds simply break.
Ionic solids rely on a different mechanism called electrostatic attraction. This occurs when electrons are transferred from an atom with low electronegativity to one with higher electronegativity. This transfer creates opposite charges. The positive and negative charges then pull toward each other to form ionic bonds. Sodium chloride, or common table salt, is a classic example of an ionic solid. These solids typically have moderately high melting points. They are also extremely brittle and have very low vapour pressures. Low vapour pressure exists because it requires a massive amount of energy to move a charged particle out of the ionic medium into empty space.
Metallic solids are characterized by metallic bonding. In these materials, there is a high density of shared, delocalized electrons. These electrons are not tied to one specific atom but move freely throughout the structure. This creates a "sea" of electrons that holds the atoms together. Because this bonding is non-directional, atoms can slide past one another without breaking the bond. This makes metals ductile, meaning they can be shaped or stretched. Pure metals often have low strength, but they can be strengthened by adding defects through alloying. Melting points in metals vary significantly. For instance, mercury melts at a very low 234 K. In contrast, tungsten has an extremely high melting point of 3695 K. Most metals, except for alkali metals and Group 12 metals, have high boiling points.
Many materials exist on a continuum between these categories. For example, covalent and ionic bonding form a spectrum. As the difference in electronegativity between atoms increases, the bond becomes more polar and more ionic. Metal oxides often fall along this iono-covalent spectrum. The silicon-oxygen bonds in quartz are a great example. These bonds are polar but remain largely covalent. Some materials also show mixed metallic and covalent characteristics. Transition metals can exhibit directional bonding alongside metallic bonding. This increases their shear strength and reduces their ductility. Tungsten is a classic example of such an intermediate case.
Another interesting transition occurs between molecular and network covalent solids. Molecular solids, like paraffin wax, consist of small, non-polar molecules. However, long-chain molecules like high-density polyethylene can form very strong fibers. When these chains are well aligned, they can rival the strength of steel. If these molecules undergo cross-linking, they can form continuous networks. This process creates a range of materials. It starts with cross-linked polyethylene and moves through rigid resins to diamond-like carbons. This shows there is no sharp boundary between a simple molecular solid and a complex network covalent solid.
Finally, some solids show even more complex connections. There are intermediate forms between metallic and molecular solids. While strong metallic bonding is usually incompatible with weak molecular components, some systems allow for both. These are often found in reduced-dimensional systems known as charge transfer complexes. There are also connections between metallic and ionic solids. Some molecular salts show both ionic bonding and one-dimensional conductivity. This suggests a degree of metallic bonding exists along the axis of conductivity. These overlapping properties demonstrate that the world of solid matter is a complex web of interconnected behaviors.
Where will your curiosity go next?
More to explore
✨ What else?
Related topics you might enjoy
🔬 Go deeper
More advanced topics to explore
🪜 Step back
Simpler topics to build understanding
What is Nepedia?
A free, ad-free encyclopedia for children. Every article is written at five reading levels, so the same page works for a five-year-old and a fifteen-year-old — use the level switcher above to see this one change. No account needed to read.